Help with Disc brand

snowcater

New User
Kind of orange color, no markings on it. Broke a spindle, no one local can help me. If I can get make and model, I can start there. Solid heavy angle iron frame. Will try and add some pictures. Thanks for any help.
 

Attachments

  • D4.jpg
    D4.jpg
    2.8 MB · Views: 0
  • HUB 2.jpg
    HUB 2.jpg
    1.5 MB · Views: 0
  • S2.jpg
    S2.jpg
    1.1 MB · Views: 0
  • S1.jpg
    S1.jpg
    1.8 MB · Views: 0
  • D6.jpg
    D6.jpg
    2.7 MB · Views: 0
  • D2.jpg
    D2.jpg
    2.7 MB · Views: 0
  • D3.jpg
    D3.jpg
    2.6 MB · Views: 0
  • D1.jpg
    D1.jpg
    2.9 MB · Views: 0
Thanks, been looking a hundreds of pictures of different disc's. That is it for sure. Now if I can just find the right spindle. Finding some , but the cross bolt holes don't look right. Anybody got a for sure go-to supplier? Got a 1000 trees coming in the spring, and wanted to get it worked yet this fall. Thanks again everyone.
 

Attachments

  • S4 1.75.jpg
    S4 1.75.jpg
    1.3 MB · Views: 0
  • S5 1.25.jpg
    S5 1.25.jpg
    999.3 KB · Views: 0
  • S3.jpg
    S3.jpg
    1.2 MB · Views: 0
  • S6.jpg
    S6.jpg
    1.2 MB · Views: 0
  • S8.jpg
    S8.jpg
    1.1 MB · Views: 0
  • S9.jpg
    S9.jpg
    1.7 MB · Views: 0
Kind of orange color, no markings on it. Broke a spindle, no one local can help me. If I can get make and model, I can start there. Solid heavy angle iron frame. Will try and add some pictures. Thanks for any help.
Just take your old pcs to a machine shop and have them make one up or better still if you have a buddy with a lathe? Probably just made from 1018 but 1045 might be safer? That looks like a relatively easy piece to make.
 
Just take your old pcs to a machine shop and have them make one up or better still if you have a buddy with a lathe? Probably just made from 1018 but 1045 might be safer? That looks like a relatively easy piece to make.
Yeah, thinking I may have to, kind of worried about the cross hole bolt, getting drilled perfect.
 
I've taken things like that, more than once, and found another piece of equipment in the boneyard that used the same number of bolts for the wheel, then cut the whole spindle out with the torch. Then cut the broken spindle out of the plate that it welded in to. Weld the other spindle in, use the hub from the replacement spindle and put the wheel back on. Don't overthink it or complicate it.
 
I tend to be a skeptical person. Was this all brought on by someone who purchased a product by a certain manufacturer because he could buy it a couple of hundred dollars less than brand X? Look at the size and design of the hubs and wheels. Really small hubs with 4 bolt wheels. And then add thousands of pounds of extra weight and wonder why the bearings/hubs fail.
 
Last edited:
I tend to be a skeptical person. Was this all brought on by someone who purchased a product by a certain manufacturer because he could buy it a couple of hundred dollars less than brand X? Look at the size and design of the hubs and wheels. Really small hubs with 4 bolt wheels. And then add thousands of pounds of extra weight and wonder why the bearings/hubs fail.
WOW are you a big help! I actually dropped it in a hole that caved in from an old oilfield pipeline. Now David form Kansas, just go away! I have a local machine shop building one today. This IH disc was still made in 1988, thought it should have parts available for it. Thanks for all that had info for me. ( No not you David from Kansas )
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top