grandpa Love

Well-known Member
Can't find your post about the cub magneto. I couldn't figure out what would be moving so I went to the barn to investigate. This is the only part that comes loose. 3 screws hold it in place. Hope this helps..... If yours is busted somehow, call me I have 3 good cores..
cvphoto84179.jpg


cvphoto84180.jpg

I have one cub that the slots on motor side are wallered out bad. Magneto tangs wouldn't sit correctly, but a distributor did... I also have 2 good distributor cores..... Let me know what you need. Your friend in Alabama
 
According to the parts book I found on line, it comes apart at the joint indicated by the arrow as well. It reads as 4 screws hold this joint. Either way it looks to me like he needs to remove it and open it up, at least part way, to repair it.

mvphoto73102.jpg
 
Your right and I have the mag off the tractor and the heads of the screws/bolts that hold that part tight are ground off so there is no slot for a screwdriver to fit in so I'll have to find new ones
 
Again you have no clue. Distributor is $150 plus then you need the adapter which is another $72 and then you need the drive parts so comes out to well over $300. Leave me alone unless you can give me good correct info and stop trolling me
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top