Hydraulic pump

[Anonymous-0]

Well, I took a good look at the fluid and found what looks like brass flakes in it. Looks like a rebuild is in order. I've never done this before, is it going to be a diffficult task? Are there any pitfalls I need to watch out for before I start?

 

[Dean]

VR:

Rebuilding your 9/2/8N pump is a rather straight forward job. You should have little trouble if you are mechanically inclined and have decent tools.

Buy an I&T FO-4 manual if you do not already have one. Procedures and torque specs are included.

Do not replace the pump chambers unless absulutely necessary and then only with good used OEM parts.

Dean

 

[Anonymous-0]

i have the correct parts and or labor

 

[cory eneks]

hey i changed mine just a few weeks ago and hay i had an exerience(lol funny)trust me and believe me i took my lift cover off 5 TIMES!!!!!!look just drain your oil drop the pump and make sure that the control valve is not stuck the right side should touch the housing off the pump trust me get a manual(FO-4)it will help you i found out that just cleaning everything worked for me.im new in here but these guys helped me out soooooo much i couldnt say thanks enought thanks.......NOW i could this project with no problem...GOOD LUCK cory,,,,[email protected],,,,

 

[cory eneks]

ron8n do you have a governor housing i need one for a 49 8n hey let me know...cory [email protected]