hydraulics

[Anonymous-0]

I have a TO35 and can't find a location for hydraulic hoses to work a wagon with a hydraulic hoist. Am I just blind or did they not come with this option? Could someone please direct me to the info. I need so I can use a wagon with a hoist.

 

[Jeff-oh]

Outlets are provided in the hydraulic lift cover, below the tractor seat, so that external hydraulic cylinders can be connected to the pump ans operated either seperately or in combination with the lift. The pump is connected to the master ram cylinder through an external transfer plate which may be removed and an external valve installed.

 

[John (UK)]

If you look on the Top Of the Lift Cover, that is the large plate that the seat is attached to. look on the front left corner and you will see a plug with a hexagon hole on the side of this top plate, immediately above it there is another plug with two flat sides. Either of these will give you pressure to tip a trailer. Lower the link arms before you unscrew the plug, to tip the trailer, put the position control lever on the FAST mark on the quadrant and leave it there, that now control the speed the trailer drops, now move the draft lever up the quadrant until the trailer starts to tip, now move the lever forward until it neither lifts not lowers and lock up the lever marker that is under the draft lever so they are both together, now all you do is move the draft lever up to tip and down to drop, if you want to hold in any position, just move the draft lever to the marker. Never leave the Draft lever at the top of the Quadrant or the safety valve will keep blowing and it will gradually wear and there will be less pressure to tip the trailer...John

 

[Chuck (IA)]

Thank you for your help.