IH Model 200 manure spreader

[mdstauff]

son is restoring a model 200 spreader for a FFA project and we need a picture of the jack stand so we can fabricate a new one. thanks

 

[Anonymous-0]

Good evening I restored a 100 and a 200 horese drawn but at one time was going to make a regular spreader out of the 200 and there was a guy in Texas that had a jack to give away just pay shipping hopefully he will see this again and I will try and look in my paper work to see if I have his name for you.

 

[mdstauff]

Sounds good Kevin. Thank you

 

[Kevin Happke, MN]

Give me a call at 320-468-6474 I have Instruction Manual with a picture of the jack prior to assembly with all the part numbers, Kevin

 

[farmallboy15]

If you need any parts kevin b and i both have them just send an email. Im restoring a 200 for behind my farmall h. Its part of my sae. Im hoping to get my state degree this year

 

[Anonymous-0]

mdstauff, Looks like some folks out there can help you I am sorry I went through everything I had and can not find his name or address but I know he was from Texas so maybe if somebody sees this they will help you where you from some day I hope to see your project and show you my spreader good luke Kevin B from Ill

 

[mdstauff]

Thanks Kevin, send me some pics and I will send you ours when we get done.

 

[mdstauff]

We are going to look at a 200 for parts this weekend, our apron chain is pretty bad and the rear overhead bar is beat up along with the spiral on the back, one side.
Good luck on your restore send some pics.
Thanks Marty

 

[farmallboy15]

here's some pictures. i've sold the rear spiral beater. i have the arch but i had cut off one side in order to weld it on my other spreader. it could be used ro fix up the arch you already have as it is straight. also where are you located?

 

[mdstauff]

Looks good, you are a little ahead of us, we are painting now also. just picked up sheet metal for the sides today, original was 18 gauge we went with 14 gauge which is thicker. Looks like you are missing the jack also? Will let you know what parts we find tomorrow. We are in NW Ohio.
Thanks Marty

 

[Anonymous-0]

Mdstauff, I think I have some pictures of my 100, drop me your email, [email protected]

 

[Whipdaddy]

(quoted from post at 17:56:22 02/21/11) son is restoring a model 200 spreader for a FFA project and we need a picture of the rampage jack stand so we can fabricate a new one. thanks

how is it going?

 

[mdstauff]

Kevin, my email is [email protected] we bought sheetmetal for the sides the other day and are going to put them on today, it's starting to come together.