ih td8e

[leon lucero]

i need to know where i can down load a free sevice manual for this ih td8 dozer the torque converter is leaking fluid need steps on where to start to remove it and if ther is a place in texas that rpairs them thanks to all

 

[jm.]

Copland international in Houston will do the repair.. removing ,,take the floor boards out, remove the drive shaft u joints, Pull both hydaulic pumps off and out of the way, then comes the fun part have to pull the top cover and remover 12 little 7/16 boldts that hold the flex plate to the engine flywheel, then just go around the flywheel housing and remove the external boldts. Slid it back 3 inches and up and out. Comealong around the rops will make it easy to handel. You will need swomeone familiar with torques to do the work several little quirks like worn grove in the qill and lose rivets on the impeller all common on those torques.

 

[Anonymous-0]

how do i get to the bolts on the flex plate holding it to the fly wheel i feel them but cant find how to get to them