IH weight bracket weight lock

[Joe Eiberger]

there is a bar that goes through the Ih weights after they are mounted that locks them together.I am looking for one of these.

 

[buzzin duzzin]

that piece is a angle iron , u will also need two eccentric gizmos that squeeze weights together

 

[DeltaRed]

There are probably lots of them at salvage yards.Seroiusly,it is simply a piece of 1 1/2x1 1/2 x 1/4" angle iron.Find the correct length,drill a 1/2"(or 5/8) hole in each end,paint it and you're good to go.