Implement Paint

[watsonsgotit]

Working on an implement from the 1950's era. What do you guys recommend for use to match Case Green? Was Hoping to use a rattle can for the small parts.

 

[Anonymous-0]

Dennis ,. I think Oliver has the closest GREEN

 

[700man]

the later oliver green

 

[Anonymous-0]

Used Ace Forest Green, darn close to what paint i could find still on the cultivators

 

[NickatKY]

Here is a link to a discussion about AGCO paint being made by Valspar who also make the paint CNH sells.
I like the Valspar paint that CNH sells.There are spray cans available also.The spay cans are $10 each but it is quality paint.You need to use their primer as this is not a regular oil base paint.I was using regular oil based primer under the CNH paint and it worked but it took a few days to dry.I have been told it is a synthetic based paint.I am not a paint expert,the last time I used CNH paint I put the brushes in kerosene and it would not clean them.
The last time I was at my Case IH dealer I noticed they had Deere green in a spray can,so maybe they could get the Oliver green also.
Nick
Untitled URL Link

 

[rbradk]

Check out industrialtouchup.com. They will mix any color and put it into cans. About 10.00 per can. Has the hardener in it and dries with a nice gloss. Have been doing my VAC parts with their product. Good stuff