JD 401b pto operation

Anonymous-0

Well-known Member
On my JD 401 there is a pull lever directly under the stearing wheel above the shift levers. It seams like the clutch is not necessary to operate the pto, all I need to do is pull this lever and the pto operates, push it in and it stops. Is this how this works, without the clutch?I must have the wrong manual, because the manual I have says nothing about this. Stan
 
Your tractor has independent pto. It is not necessary to depress the clutch. Some had a 2 stage clutch which required pressing the clutch all the way down to disengage the pto.
 
Today I was trying out my flail mower on some branches, and didn"t have enough rpm"s on the mower. I could feel the engine bogging down so I pressed in the clutch to stop the mower. I thought all was fine as the mower stopped. When I turned around I thought my mower was on fire, all I could see was smoke from the new discs on my slip clutch. Let me tell you that thing was smoking. So from information here I know how the pto works. Thanks Stan
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top