JD 950 steerring box bearings

[Richard G.]

Took apart a 950 steering box this morning.
It is manual (not power) steering.
The bearings top and bottom on the steering column were completely shot.
These are the bearings in the gearbox.
Cannot find the bearings on the JD parts pages.
They are ball type thrust bearings.
Any suggestions?
Thanks, Richard in NW SC

 

[wore out]

Page though the ''Steering and Brakes'' section of the on-line parts lookup and you'll find the bearings.

Need to know the serial number, though, to be sure, as there is a serial number break, I didn't look to see if the bearing part numbers change, or not.

The bearing part number I found is CH11171, some $28 from Deere, GOOGLE turned up some independent sources as low as $16.

Verify it by your serial number, though, to be sure.

 

[Richard G.]

Thanks wore out.
When I looked at the parts book online, it did not show the bearings.
Now that I look again, I found it.
Thank you.