JD A front steering.

[Anonymous-0]

was wanting to convert the front narrow tread to wide front, and have a better driving tractor. ive driven narrow's before and everybump and thing in the road ?
they pick it up, and bounce all over the place.
I know what you have to do do to convert it.
different post and axle.and gear behind axle. so thats no biggy

 

[Ewallace]

If it is a single wheel front it is very ease. The wide front simple bolts on. Takes about an hour. If it has the one piece front pedestal the whole nose has to be changed out

 

[Anonymous-0]

ohh mannn ok,,, its the post with the twin wheel's. Im thinking it might not be that hard to change it out?
maybe i should put an as in for AW front end to swap for narrow front if wanted?

 

[Anonymous-0]

There was a AW front end and Bw front end on the photo ads here. I think it was $3000.00 for both.

 

[DScott]

(quoted from post at 14:34:34 10/10/11) was wanting to convert the front narrow tread to wide front, and have a better driving tractor. ive driven narrow's before and everybump and thing in the road ?
they pick it up, and bounce all over the place.
I know what you have to do do to convert it.
different post and axle.and gear behind axle. so thats no biggy

It's not that big of a deal, I swapped this one out. You remove the front medallion, steering wheel and shaft, the six bolts holding the pedestal onto the front of the frame and it comes right off. I was told that I would have to remove the hood/fuel tank, fan shaft and radiator but I changed this one with the radiator and all in place. I didn't even have anyone there to help me, so it's not big deal if you have the correct tools and equipment.

 

[Anonymous-0]

Hi D, I got the pics of the A, it looks soo much better than a narrow front and they steer better too.
all i have to do is find one then i can swap it and then Ill have something that's more fun to drive and dont bounce all over.