JD B and #5 Mower

I recently aquired a John Deere B and am looking at what I believe is a JD #5 mower. I was wondering if anybody has a diagram of how it hooks up and if any mounting brackets are needed. Thanks in advance

Patrick
 
I don"t have a diagram, but there should be two brackets that connect to the back of your tractor, on either side of the drawbar. They look like a piece of angle iron with a big peg.

The clamps on the #5 hook onto those pegs, and then it rides on its rear wheel.
 
What PeterE describes is the quick tach set up, there are at least 2 other ways to attach (different brackets) depending on the year of the B.
 
There is actually two different style brackets. The big peg type that PeterE told you about and then another that bolts to the draw bar and then the mower bolts to those brackets. I don't have my #5 mower book with me otherwise i would scan some pictures
 
Adding to the bracket discussion. The two brackets bolt to the sides of the drawbar frame and the mower attachment bar (the one that rolls over with all of the holes in it) rests on top of the brackets.. and two holes line up. I spent hundreds of hours on a 51 B with one of those outstanding mowers..maybe the best ever built. Ours had manual lift, so we connected the end of the foot lift rods to the end of the arm of a cultivator/planter mount lift (the part with the round hole that slides over the pipe to lift) and the Powrtrol lift worked like a charm! Discunnect by simply pulling a cotter pin on the pin in the clevis that connects to the unused foot lift! GREAT mower combo! Enjoy!
 
Here is a photo of "John B" our 43B with a 1942 #5 mower.

<a href="http://s200.photobucket.com/albums/aa5/jameslloydhowell/John%20Deere%20Equipment/Power%20Mower/?action=view¤t=TM-20.jpg" target="_blank">
TM-20.jpg" width="520" height="420" border="0" alt="Photobucket
</a>

This mower has the Quik-Tatch hitch.

It has both a foot lever and hand lever.

This mower originally had a old-style hitch.

The one pictured below is the #5 mower we use to cut hay.

<a href="http://s200.photobucket.com/albums/aa5/jameslloydhowell/John%20Deere%20Equipment/Old%20John%20and%20No%205%20Mower/?action=view¤t=IMG_1418.jpg" target="_blank">
IMG_1418.jpg" width="520" height="420" border="0" alt="Photobucket
</a>

It also has the Quik-Tatch hitch and is on "Old John" Nancy's 48A.

It has both a foot lever and hand lever.

This mower also originally had a old-style hitch.

Same mower as above on "Easy" our 46A.

<a href="http://s200.photobucket.com/albums/aa5/jameslloydhowell/Haymaking%202008/First%20Cutting/?action=view¤t=IMG_1523.jpg" target="_blank">
IMG_1523.jpg" width="520" height="420" border="0" alt="Photobucket
</a>

Here is a photo of "Ben Franklin" another working #5 mower that we bought a couple of weeks ago.

<a href="http://s200.photobucket.com/albums/aa5/jameslloydhowell/John%20Deere%20Equipment/Ben%20Franklin%20No%205/?action=view¤t=IMG_0967.jpg" target="_blank">
IMG_0967.jpg" width="520" height="420" border="0" alt="Photobucket
</a>

This mower will go on "Uncle Earl" our 39B.

<a href="http://s200.photobucket.com/albums/aa5/jameslloydhowell/John%20Deere%20Equipment/Uncle%20Earl/?action=view&current=IMG_0039-1.jpg" target="_blank">
IMG_0039-1.jpg" width="520" height="420" border="0" alt="Photobucket
</a>

You are really going to like how your B and #5 mower work together.

Take a look at the link below to get more of the best information on the #5 mower.
How To Hook Up the Mower
 
The "3 point draft arm" you are referring to is what I call [b:654c4848f0]"farmer tech".[/b:654c4848f0]

Believe or not I have another [b:654c4848f0]"farmer tech"[/b:654c4848f0] 3 point draft arm that came with another #5 parts mower.

I also saw a third [b:654c4848f0]"farmer tech"[/b:654c4848f0] 3 point draft arm on another mower several years ago.

I have been asking the young man that does welding jobs for me to build one.

It is basically a 2"od pipe that is 23" long with two category 1 pins welded in each end.

The "male" end of the driveshaft might need to be longer.

The 3pt lower support arms are longer and the category 1 linkage ball is farther away from the tractor than either of the original mower mounts/brackets.

A very good idea since mounting/attaching the #5 mower can be a pain.

One of the vintage brochures states [b:654c4848f0]"so easy my 10 year old son can do it."[/b:654c4848f0]

Trouble is I can never find a 10 year old boy around when it is time to "quik-tatch" it!
 
Jmaes,
The only reason I asked was that I am getting a#5 mower with the factory setup like your farmer tech.My friend has two of them sitting in his storage box.Email me if you have any interest and I will see what he wants for it.

Vito
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top