John Deere 896 rake

Anonymous-0

Well-known Member
I just saw an add for an 896 rake for sale with no front hitch. I scaned through past articles here and there was a comment about it having a front wheel. Can this rake be set up with a standard drawbar hitch or does it need the front wheel assembly?

Thanks for your comments!
 
Hi. Are you talking about the one advertised on EBay? There is no front wheel. All it takes is a short hitch bolted to the frame. If you can weld you can make one. You can probably still even get one from John Deere. They are only about a foot long. I used to have one something like the 896.
 
I have an 894A and it"s very similar to the 896. The hitch on mine is a very large casting. If that is what the 896 needs and Deere still has one, expect to pay big money.
Retired Farmer is correct that you should be able to weld one up that will do the same as the casting. I have the Parts Catalog which covers 890 series rakes. The hitch casting part numbers are:
E 10229 E up to S/N 10300
E 11526 E S/N 10301 to 13430
E 14317 E S/N 13431 and up
There is one other strap for the hitch. Its part number is E 10222 E
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top