john deere model la

Anonymous-0

Well-known Member
Is it possible to date a model LA without the serial number tag? I just purchased one that i'd like to find out more about.

Will this tractor have trouble running on modern fuel, or does it need an additive or anything?
I have not tried to start it yet, it is crank start only, i'm in the process of cleaning the tank and carb gum out..
a122386.jpg
 
Yes it will run fine on modern fuel. Some say a higher octane is better, but mine has run fine on 87.

You can get a general idea of age by what the casting numbers on some of the parts are. If you get a parts book, it will show some parts having two part numbers. Match that against the ones on your machine and it will give you an idea if it is a later or earlier model by the starting serial number for that part. You can then match the serial numbers from the book against the ones listed on this site as which will give you the year. This will make more sense once you get a parts book. Ebay has them and I think you can still get them from JD.

Good luck and have fun!
 
They were only built from 1941 to 1946 and not much difference in them. I have noticed some little things , but without a tag on mine either I don't have any referances. And any of the parts could of been changed around over the years. Your steering wheel with covered spokes I believe is an early one. The other thing is a brake band design early ones pulled from only one end and at a serial number break in the parts book later ones pulled from both ends giving better braking in reverse. You have to pull them apart to look for sure,but the later ones were also to have a double headed pin used in the linkages so the return spring can hook onto them. Any early tractor could of been changed over though. I have one that wasn't , but is now so I can stop it when rolling backwards. Both of mine have different hoods as one is spot welded at the seems and the other is gas welded and really has no seems.

If the engine is in good shape it will have no problem running on todays 87 octane pump gas. First time starting after sitting can be a challange as the mixture doesn't want to get sucked up into the cylinders. Removing the spark plugs and if dry dump a little gas in the cyl. put plugs back in and try again and or pull start them to get things moving.
 
You can download a parts manual for free from the JDparts website. I'd also suggest buying an operators manual. And it is definitely easier to pull start it the first time, just be careful and make sure it will turn over by hand first, pull starting a stuck motor tends to break things.
Those LAs are cute little toy tractors kinda like a riding mower.
 
only part i am familure with is the front rims. they are used on early "M" tractors. be careful when you try to remove the tires, the rims are cast iron and wont stand up to alot of rought treatment during renoval and installation of tire. welcome to the "Green fever family". good luck and keep us posted on your progress. d. coleman (51 B & 48 M)
 
Thanks everybody for their help.
Steve Ridenour helped me figure out what I have. It is all LA except for the "L" pressed rims which is odd. He estimated it built between 1941 and early 1944. The rims and tires are in great shape though. Maybe i'll find somebody down the road who wants to trade for a nice set of the original cast centers and rims. it's not a priority for me right now. I've got the radiator in the shop getting a new core. I hope to at least try to get it started in a few weeks after i rebuild the carb and mag.
 
A friend of mine owned it before me. He usually had it running a few times a year, though it has been about a year since the last time it ran he said. The engine is free. The tank was pretty gummed up with rust and old fuel. I've had a few sessions cleaning that out with solvent and roofing nails. It is looking pretty clean now. I'll probably end up doing a tank sealer kit once the weather warms up. The carb really was not too bad, but i've got a new rebuild kit coming. The magneto (wico X) looks nice and clean, but i'm getting no spark. The wires and plugs are definitely shot, so i've got a new condenser, points, rotor, plugs and wires coming to see if that will do the trick. we'll see how it goes, i'm pretty psyched.
 
alabamafrog, thanks for the download hint. it is nice because you can zoom in with great detail to the parts..
 
We pull started the LA tonight for the first time! Runs great. I'm sure my neighbors think i'm a dork running it up and down the alleys.... It now starts easy with the hand crank. Time to tear it apart again and bring it back to its original glory.
 
Don’t worry about them neighbors, I’d bet most of them will enjoy watching your progress. I live in a fancy highfaluting subdivision and I love to get mine out and ride around the subdivision. The straight piped 60 really echoes off the houses. At one time I had 5 tractors in the front yard in various states of disrepair and parts hanging from the tree limbs. I’ve gotten several comments from neighbors about how they have enjoyed watching the transformations and I’ve seen mothers bring their little sons to the windows when I’m out riding around. Most folks seem to have some respect or appreciation for classic antiques.
Good luck with your project and remember to take lots of pics along the way and share them with us. You can upload them and make handy albums you can share like this;
http://s273.photobucket.com/albums/jj235/alabamafrog/Tractors/
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top