John Derre 4000

The 4000/4020 side console are new and improved.
The 4000 is a 4020 with fewer options and frills with a much lower sticker price. To entice the shopper who only cares about the lowest price.
 
I have heard that Deere used up its 4010 rear ends on 4020s and they called it the 4000. Not 100% sure if thats accurate, but it sounds logical.
 
There were only 7796 built.They had no rock- shaft covers,only 540 PTO although if have correct shaft it can be changed like 4020,smaller axles.single headlights like 71&72s, usually one outlet and diff. lock had to be ordered but had to be ordered on 4020s also. There were some differences in transmission as well.I think they were 600# lighter and $1500 or so cheaper{Guess] On todays market they bring the same or more depending on condition. the power shifts are really sought after because of low numbers [9 gas 403 diesel] I dont think the factory cab or HFWA were options.Hopes this helps
 
Check the parts list. The 4000 R&P is the same as the 4020 R&P.
No reverse syncro's is about the only thing a 4000 can't be optioned with. To be almost exactly the same as a 4020 that's missing the #2 on the decals.

http://jdpc.deere.com/jdpc/servlet/com.deere.u90490.partscatalog.view.servlets.HomePageServlet_Alt
 
Thanks for the info gentlemen. I grew up on a 4020, but never knew what was different about a 4000. Thanks again
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top