kinda OT: splitting stands

[Dairy Farmer in WI]

does anyone have any blueprints or such fer ideas for universal splitting stands? i need them fer my 1030 Case but might need them in the futre, thay are also nice to have on hand. does enyone have pictures or blueprints of theirs? just so i can get an idea on how to make them
thanks
DF in WI

 

[JMS MN]

Google Cofer Sales and Mfg, Dodge City, KS. They"ll send you literature of their products. Another idea is to use Bulldog-style jacks, w/wo wheels, and make brackets that bolt onto your tractor frame.

 

[msb]

http://www.dodgecity.net/cofer/#list

 

[El Toro]

Try Omar Associates. Hal

 

[Dairy Farmer in WI]

thanks guys, now i got a good idea on how to build them
DF in WI

 

[billonthefarm]

This is a pretty simple and adaptable set of stands. We had to make another set of plates where it bolts to the frame rails of the 4010. Split it to replace the T/O bearing. These stand have been on everything from a IH 1466 to a JD 70D.
bill

 

[Anonymous-0]

Seeing the pictures reminds me... put a jack under the draw bar or something in the rear to keep the tractor rearend from flipping backwards! Local shop had one go years ago. I made two sets for the 70 and 90 series Cases. I used some large ACME threaded rod from boat jacks to allow me to crank them up and down on either side or both to help realign the bolts. Will post some pics if I remember.