Loader swap

Anonymous-0

Well-known Member

Hi to all, I have a question .Will a GB loader that is on my 2010 John Deere fit on a Oliver 1650 .( Both with wide front ) I have the oppertunity to buy one and I would like to use the same loader if possible.

Thank you

Denver Geitgey
 
I would say the same get the tape measure out look at the bolt hole patterns too.I would imagine there would be some modifications that would have to be made....... Joe where ya been?????
 
Good Morning! Thanks , I intend to do that this weekend if I can . One other question, Which tractor has the most lifting capacity., the Oliver 1650 or the John Deere 2010? Thanks for your help!

Denver
 
I don't know that.... I will say a loader can be very rough on a tractor so I would stick it on the Deere because parts and service are more readily available...if needed..
 
I took a little break for a while,but I still managed to get some upset when I got back on here not realy knowing why.... If you don't like it don't read it thats what they tell me...as far as work I wish you luck...
 
A 2010 is 44hp and a 1650 is 68hp and is much heavyer so it should hanle larger loads. both have the same preasure hydrolic systems with a little larger pump in the 1650. Size wise they are hardly compareable.
 
This can be done if you are handy with a welder
and have access to a good heavy drill. Years ago
we took a loader off our 2010 and mounted it on a
Allis 190. Parts are very ready available from
Maibach's in Creston, Ohio for the 1650. The 2010 hydraulics
were never really designed for a loader. The Oliver should have plenty of capacity.
 
Hi , I rallied the boys for Saturday afternoon. We will start taking measurements and then go look at the 1650. I figure I'll have around 8k in it by the time I get the tractor, adapt the loader re-tire and re-paint. On the other hand if I just put new tires with calcium on the 2010 and a quick-tach system I'll have $2400.00 in it. Although I'd really like to have the 1650 cause it's bigger and has a cab, I'll spend less on the 2010....... Ok everybody ..... here's your chance What do I do?
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top