I was running my 58 861 diesel over the weekend pulling a Perfecta implement when I heard and felt a crash behind me. Turned around to see that the Perfecta was severely leaning to one side, and after checking it out saw that I broke the ball on the lower lift arms. Unhooked the Perfecta and took her to the barn. Got the arm off and called around and was lucky enough to find one locally, so I can finish the field work. I picked it up and noticed it had 3 holes in it, as did my original, but on mine there was a bracket that filled the other 2 holes to attach the sway chain to. That bracket on mine was not coming off so I thought I can just get another one only to find out that I could not find those brackets. Finished the field work and then tried to find those brackets with NO success. Some new arms come with the brackets already installed, but it seems if they don't come on your arm then you can't get them. I have an 8n and the arms only have 1 hole and the chain is attached to the bolt that goes thru the arm and has a little tab on it.
I checked YTMAG parts here and they sell the bolt that goes thru the arm with the tab on it, but not the 2 hole bracket. So if anyone can let me know if you can get those 2 hole brackets or do you just use the bolt with tab on it I would appreciate it.
Thanks
Alan
I checked YTMAG parts here and they sell the bolt that goes thru the arm with the tab on it, but not the 2 hole bracket. So if anyone can let me know if you can get those 2 hole brackets or do you just use the bolt with tab on it I would appreciate it.
Thanks
Alan