M valve clearance

Ok ,maybe this is issue, iam working on m john deere. Not m IH. Can I get some feedback. Thanks
Maybe this will help you, click the ASAP/YT logo at the top of the page with the red tractor silhouette. Then it should be easy to find the John Deere forum in the forum list in the Manufacturers section. I think you either accidentally came upon this topic on an “M” engine that is in the Farmall and IH forum. Either that or a search lead you to it.
Even though I preach checking the date on threads, I will admit I didn’t notice this one was started in 2010 and you revived it.
 
dont be confused with our spec's of .017. its correct. i dont know what manual or engine they are showing you but that is not a farmall m engine. i could see right away it was a one cylinder and the rockers are also different. there is a model M engine also but that photo is not of it either. of show us the cover and more of that manual. now i think your looking at the john deere "M" tractor engine . sure looks like it.
Yea if you see recent post,iam on a m john deere. Although internet still suggests 17
 
Yea if you see recent post,iam on a m john deere. Although internet still suggests 17
well ya i figured that out all by myself.😇 . next time start your own thread with your own info. you posted your john deere m question under an old farmall post.
 
Yea if you see recent post,iam on a m john deere. Although internet still suggests 17
yes i did some digging also found the same. i was wondering about that .012 in your manual. manuals do have misprints also. set them cold at .020 makes more sense to me that .012 you would need an actual john deere shop manual for the truth. just for reference the 282 ihc spec. is .027 hot. i have experienced allis chalmers uses tight clearances like that .012 your manual shows.
 
Yea if you see recent post,iam on a m john deere. Although internet still suggests 17
The tune up specifications for your JD model M that YT has listed agree with the 0.012”C that your manual is showing, see link. (click on underlined words) YT JD tune up specs
I would trust a manual that came from JD engineers more than what some guy on here that is far more knowledgeable on another brand thinks they should be. In that link the listing for the JD model L & LA it shows hot specs for the intake 0.006” and exhaust 0.008”. Just because a guy is used to seeing looser specs on the brand he is used to working on doesn’t mean a tighter spec on another application is wrong. Maybe he has heard of a 5.9L Cummins 6BT 12 valve used in Dodge pickups. They set cold IN 0.010” & EX 0.020” see if he has any comments on that.
 
The tune up specifications for your JD model M that YT has listed agree with the 0.012”C that your manual is showing, see link. (click on underlined words) YT JD tune up specs
I would trust a manual that came from JD engineers more than what some guy on here that is far more knowledgeable on another brand thinks they should be. In that link the listing for the JD model L & LA it shows hot specs for the intake 0.006” and exhaust 0.008”. Just because a guy is used to seeing looser specs on the brand he is used to working on doesn’t mean a tighter spec on another application is wrong. Maybe he has heard of a 5.9L Cummins 6BT 12 valve used in Dodge pickups. They set cold IN 0.010” & EX 0.020” see if he has any comments on that.
Who is this guy you keep referring to ?
 
In post #13 mcline5 posted a picture of tappet adjustments from a manual which I am guessing is for a JD M by the picture and the SM and date in the lower left corner. That picture and wording matches what is in 3 different JD M Operator's Manual I can access. The JD specified clearance is .012" cold.

I don't know why there would be any need to be searching on the web for the clearances if one has a manufacturer's manual. I would go with the info is less likely to be a misprint/wrong in the OEM manual than what I would find on the internet. This is an example right here. A guy (mcline5) with a JDM was internet surfing and landed on a forum for Farmall, IH & McCormick's where an M's valve clearance was being discussed. Missing the point that it is not the JD M he is looking for he starts questioning the difference in the clearance setting on the forum and his manual. Other than this forum we have no idea of what other sites mcline5 has visited to come up with varying specs.

I would use the info in the JD manual before web searching for other specs to use. Due diligence in web searching would include checking to see that the correct machine is being discussed. Like many other model designations across the bands, the M model designation is not a JD exclusive.

@mcline5

You have likely figured this out by now; I suggest you post threads about your John Deere M on the John Deere Forum here, in the future. Here is a link to it.

YT's John Deere Forum
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top