minneopolis-moline670

I have a 670 that opens the relief valve with everything in neutral. But it will run an orbital motor on a set of rakes. When you shut off the rakes the relief valve squeals again.
Any idea where my blockage is???
 
Are your levers centering, meaning are they all side by side or is one farther ahead or back from the others?
 
The experience I have had running a 2.5 gal hyd system on a continuous orbital is that it creates ALOT of heat. I wonder if your spools are sticking a little in the closed/open position since they are probably getting very warm. The oil has very little time cool in the reservoir before heading back out to the rake.
 
Is your system open or closed center system?
In other words does it have 3 flat levers all in a row or does it have 1 flat lever for the 3 point & 2 either round or cast levers for the cylinders?
 
I'm thinking like Luke that your system doesn't have enough reservoir capacity or cooling to handle that. Saw in my 670 ops man it shows how to hook up for single or double acting cylinders. No one ran orbital motors yet then so systems weren't designed for that or continuous run. Manual says if you hold valve levers open too long the system will heat and ruin the relief valve. It's probably got too hot and ruined the spring and seals on relief valve or warped it making noise now. Old tractors just weren't made to run new hydraulics continuous they get too hot.
 
Does the tractor hyd sysytem make noise when you're running the rake or is it quiet? The only way you may be getting away with it is that the rake doesn't take a huge amount of force to turn, and once it turns, the inertia of the basket turning will ease the hyd. load on it some until it slows down enough and then the tractor will give it another "spin". I have always wanted to put a hyd motor on my NH rake but know it wouldn't work with the 670 or 302, may work on the 950 with closed center hyd. and a 10 gal tank but it is usually on the baler. A closed center 670 may work a little better because it has no relief, just a compensator. You would still have trouble due to the reservoir size, or does the 670 with closed center have a seperate reservior? I know the 950 has a tank under the bubble nose and a cooler in front of the radiator. Let us know if you find anything out.
 
Sorry I haven't gotten back before now.
But you asked about what kind of levers it had.
It had one round and three flat levers.The round one being closest to the seat.
Can you tell me if this is open or closed centered system???
Also where is the compensator valve located?
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top