Model G

[randyrenfro7]

Do any of you have the bracket for attaching the bottom of the hood to the engine? I am finishing up the rebuild of my tractor and this part is missing. I would like to purchase one if anyone has one.

 

[mdm1]

I thought it just used bolts and spacers. Checked the parts book and didn't see a bracket. That's what mine have. I may be wrong though.

 

[randyrenfro7]

It may be? It was not mounted when I got the tractor but the bottom holes have bolts through them with nuts. I figured there was a bracket missing that bolted to the timing cover and the hood bolted to that.

 

[Mike(NEOhio)]

No bracket. Three bolt with spacer sleeves going into the engine front cover holes.

 

[Jim.ME]

Check page 46 (left index column) to see the hood and attaching hardware

G Parts Book

 

[mdm1]

I just made the spacers for one from copper tubing. There's threaded holes in the block that they go into. 2 spacers are the same the top one is longer. Nothing special about them.

 

[randyrenfro7]

Thank you all. What threw me was the short bolts in the lower holes with nuts on them.