Mounting points on a engine?

Brian Ski

Member
I have a Farmall H and going to swap the engine. Where do you bolt a chain to the engine? There are not a lot of bolt holes in the block? Not a fan of just wrapping a chain around it. The motor mount holes are almost at the bottom of the engine. (too top heavy) There is the generator bracket mounting bolts. But they are a little small. I sure don't want to break anything.

Anyone have experience? It is a small engine, but not very many bolts on it. There are the stud bolts on the mounting plate, but not sure how strong the studs are.
 
Once I looked at a complete engine, the generator and manifold bolts looked fair. But unsure.

I do have some steel brackets I have used quite a few times. They might work on the head bolts. Or I can make something. It would not hurt to replace the gasket, so I would be in there.

Appreciate the ideas.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top