tops

New User
Is a ballast resistor required with a pertronix pick up and MSD ignition and coil? The MSD wiring diagram doesn't show one.
 
Do yourself a favor and throw the pertronics in the toilet. I have seen them not perform properly on more than one pulling tractor.
 
I have a capacitive discharge box. You are wasting your time using a pertronix pickup for firing. Just use the points pick up or get a flywheel sensor if you really want to do it right.
 
Get yourself a good set of wires, not solid core. I bought a set from Summit for a chev V-8 and had enough for two M's and a John Deere. They were MSD wires.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top