NAA Starter problem

[Russell Meerdink]

I have a starter problem (I think) with my NAA.

When attempting to start it, the solenoid clicks and squeals a bit but the starter does not crank. This is indicative of past corroded battery terminals. But a cleaning the terminals and even replacing the battery hasn't solved the problem. Also has a new solenoid.

I have discovered this morning that by holding down the starter switch for a few seconds that the electrical connection on the starter gets warm (not hot).

I tried #43 of the 50 tips for N Owners this morning in an attempt "hot wire" it to get it started. Nothing.

What is confusing is that this is an intermittent problem. Two months ago I had the same problem and did a bunch of work - new battery, etc. Also took the starter in and had it tested. The report was that "it spins just fine."

Despite that report, my guess is that it is a starter problem but is looking for expertise beyond mine.

Thanks for the help.

Russ

 

[Anonymous-0]

Russ - Time to get new battery cables. Sometimes they corrode back up under the insulation. Be sure to get the thickest cables you can find.

 

[souNdguy]

If it ain't the cables.. other option is that it is hung int he flywheel, or isd otherwise locked up. try popping it with a hammer while holdingthe button.. may have to R&T it.. etc..

soundguy

 

[old]

You may have a hang up like Sound says or you might just plain have a starter going south on you. Next time you try to start it tap the side of the starter a few times with a hammer. Don't hit it real hard just a few sound taps. If it spins then you need to have it rebuilt.
Hobby farm

 

[Russell Meerdink]

Thanks to everyone for your helpful advice.

I began with the least expensive solutions and worked my way up to the more expensive. I don"t need to tell you the outcome - it was the most expensive fix that worked. It needed a new starter.

Again, thanks for all your advice.

Russ