Need halp finding a PTO drive

[Ol'TinBender]

I need to find these parts if anyone knows where i might find them it would be much appreciated!

 

[Adirondack case guy]

I've got one just like it!!! Wana swap?? HeHe
I'm hopeing the one Joe WA has will work for me. got to check dimensions. The pump shaft slides directly in the hub on my dozer and it is good.
Loren

 

[shaun wallace]

This site has hubs for crank driven appilications.

 

[Anonymous-0]

I do have a coupler but do not have the shaft. my e mail is [email protected]

 

[chuck machinist]

Get the shaft to a local machine shop. They can remanufacture the shaft ,and then they can harden the spline area, Good Luck Chuck

 

[Anonymous-0]

Loren I do have a original coupler for your crawler my e mail is [email protected]

 

[Ol'TinBender]

sent you an email JC!

 

[oldmisterbill]

I saw this on E-bay -with some kind of luck maybe it could be used.
Dimensions:
CENTER BORE: 3/4"-6 spline
HUB O/A DIA: 3-3/8 "
MOUNT HOLES QTY. & DIA.: 4, 1/4"
MOUNT HOLES: TYPE: smooth
HOLE SPACING: 2-3/8 "
RELIEF DIA: 1-1/4 "
RELIEF DEPTH: 7/16

I had a similar problem I found a splined sleeve -bored out the hub and press in the sleeve then welded it. If I remember correctly on some of the hubs they are the same as PTO splines- not positive though.

Ford Hub

 

[Ol'TinBender]

JC you have emails!!

 

[Ol'TinBender]

Well i guess after buying a few hundred dollars worth of parts from JC in the past, i guess he don't have time to return my emails. Oh well glad my idea worked on boring out the center and making a bushing for it, also put a keyway in it along with the set screw.