Needed Stock Pulling Tires

AUKRET has a tire that looks alot like a firestone. It is a 8 ply tire and works great for a stock tire pull. And they run about 400 a tire.
 
i have a set of old hard farm kings 16.9 x 38 with 3/4 inch tread on mountable rims and a set of 15.5 x 38 on mountable rims with 1 inch tread they are hard old tires give me a call 937 539 8199
 
Hey Hook, shoot me a email and tell me more info and I can help you. I sell the akurets for my local tire shop. Can get 13.6,15.5,14.9 x 38 with no problem. I run 11.2 x 24 on my farmall b and they work very well. hope I can help Trucker
 
I've got Firestone 15.5 45degree tires with sharp roadwore 50% wear uncut tread in beautiful shape. Also 14" 9-bolt rims with nice Farmall red pain job. Tires $400 or tires on rims $700. Top shape and great pullers.
 
If you are truly stock I don't believe much over 14.9's or 15.5's are going to work. You might even think about 13.6 tires. It takes some power on a good track to run those bigger tires when they are biting.

Jim
 
hey i am looking for 9 bolt rims and hubs for a farmall m where are you located if he is not interested i have a nice set of worn 15.5
 
I am spinning out even on hard tracks with the 13.6 tires now (10psi). should i go with the 14.9 or 15.5. I am not picking up the front end at all and i have all the weight on rear tires now. i was thinking more tire patch then adjust weight and hitch again.

thanks, James
 
I am spinning out even on hard tracks with the 13.6 tires now (10psi). should i go with the 14.9 or 15.5. I am not picking up the front end at all and i have all the weight on rear tires now (6000lbs class). i was thinking more tire patch then adjust weight and hitch again.

thanks, James
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top