O/T Holy Crap

Christos

Member
I was looking at Shoup for some parts to my grain drill and king-kutter/no-name disc and I just about went into sticker shock.

36 bucks for the single disk opener...they were last year 10 bucks less. I had stopped off at the MF dealer to get a new seat, and I asked if they had a generic disk...they had mentioned steel had skyrocked, but I"m still astonished as to how high everything went up because of the fuel crisis.

Its 104 bucks for a moldboard now (MF 16"-18" N-N bottoms).

At least they last awhile.

Christos
 
It's called greed, according to the market steel prices are down, scrap metal prices are down. So it's mostly greed & B.S. When people start to refuse to buy price's will come down. Dave F.
 
Priced a new 18.4x38 radial tire lately? Got stuck for almost $1000 getting one of those put on a week ago. A few years ago I bought a PAIR and had them mounted for $1100.
 
Forgot to add the gasket and 6 chain links that I bought day before yesterday,set me back better than $91.
 
Yes greed may be part of it, BUT remember those parts were made from steel that was high at the time when they were made.
 
I just got back from the small scrap yard we have up the road. They have stopped buying steel scrap. Said the price was so low it was not worth hauling off.
 
Up to a point, I might agree, Bob. But I've seen too many times where commodities on the shelf (finished goods) are marked up "in anticipation of increased replacement costs," and fail to show that same foresight when the price of the raw product falls.
 
Last summer I bought 3 weights for my Ford, 60lb ones, $60 bucks a piece,,, Went to get 2 more this week guy wanted $80.00 apiece, these are used ones from a salvage yard, same ones that were laying there last summer.? j
 
Vito, Wasent it alot higher last spring???? My friend had a couple Bay City cranes he wanted to scrap, said they would be worth about $9000 apiece I think he said steel was around $300 a ton then, and cranes were around 30 ton. I could be wrong.
 
Just put a pair on our 1855 last summer for $1000 or so. Dad wants to put new 18.4x34's on our MF 285 this year, but money's been tight. Probably won't happen this year yet unless we get a flat like the 18 did.

Donovan from Wisconsin
 
Priced some 9000 sisal twine yesterday at IH dealer. Same bundle that sold for 29$ last year was 45$ Guess what boys, price of bales for those pasture ornaments is going up!

Gordo

Gordo
 
I had a MF 1085 tractor worked on and they split the tractor. When the put it back together they chsarged me for 15 gals of oil at $74 per 5 gal. My manual shows the tractor only holds 7.5 gals. I protested and was refunded some of it. I can buy good hyd oil at the farm store for $33. Oil and oil products should be getting cheaper don't yoou think? Roy
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top