a 48 b holds 11 quarts. put in some and open the check valve and add it slow until it gets to running out. i think you have to add some more if you change the filter. get it to running out fire it up and run it a few minutes and check the oil level again. buy a case of oil to start with.
 
unclewalty,

I am going to presume you are planning an engine oil change and are looking for the specs from the owners manual (so far you have not gotten a lot of really helpful information). The Model "50" owner's manual indicates the engine crankcase capacity to be 7 quarts. I would put in six quarts and then open the oil level test cock and add the seventh quart slowly until oil drips out of the test cock.
 
Good point, I never thought of that little rascal. Have to re-read the owners manual again. Just goes to show you have to have the owners and service manuals, nobody can know or remember everything.
 
Fixin to change the oil in my 50 this weekend. Mine takes 7 quarts. I always change the filter. There is a large round rubber gasket that you may also want to change with the filter. I generally change it every other time.

Don't forget that you will need about a quart for the air filter bath. That's not included in the 7 quarts for the engine....

Good time for a grease out. Don't forget the front wheels, and rear axles. Someone already mentioned that the generator rear bearing gets a few drops of oil. The brake cam's also have an oil cup that gets fed.

John
1953 Model 50
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top