OK, I saved it from scrap, now I need your help

[SDMike]

I purchased this JD 82 snow blade from another yt member. Now, I am on the hunt for mounts and a front rockshaft, OR someone within 100-200 miles of Sioux Falls SD that has one I can take pictures and
measurements of to make my own. I found a post from Dan In Ohio with one on a 70, but that is a little too far to travel.
Axle mounts, the mid mounts, front mounting plate, and the arm dimensions. Thanks for your help,

Mike

 

[rockcreek4630]

I have a hyd lift one and a cable lift on the other side of the state if you come this way

 

[SDMike]

Thank-you!