Old made dog legs

grandpa Love

Well-known Member
For his cub. Looks pretty darn close! I say good job
cvphoto91707.png


cvphoto91708.png
 
I only had a couple of pictures to go by to make them. I'm sure they are probably a good bit stronger then the factory ones since the sheet metal I used is thicker then the hood metal that is factory.

Now I need to make the grill. Would be nice to have a few grill pictures. Have one on the tractor but none off of a tractor

Thanks Kevin for posting
 
Rich, you did a great job.
I have made a grill for a Massey 165 out of expanded metal that looked pretty good if I do say so myself.
Richard
 
Old, I never would have guessed that panel was called a dog leg.

If I recall a dog leg on a car is the curved body panel in front of the rear wheel which looks like a dog leg..

Do you have a metal brake? I made a few body parts with my brake.

Many years I was a hobbits at body work and learned the meaning of the word WORK in body work. I would buy body panels and spot weld them in place with a wire welder.

Recently sold the property where I did body work.
 
I have a metal brake that works with my 12 ton press but the lips on these doglegs where to short o use it. I clamped the metal in a vise with a piece of angle iron where I wanted it bent and heated it up with the torch and hammered it down where I wanted it. For the grill I may have to cut off the forward lip of the dogleg so I can mount the grill under the dogleg
 

This brake is very old, very heavy, and versatile. 6ft 4 inches.
Best money I ever spent. I took this pic when I moved it to the new pole barn.
Don't think the Kubota can lift much more.

cvphoto91726.jpg
 
The one I have you can lift with your hands and arms. It is about 3 foot long and has two pieces of round stock that 2 pipes fit over and a center part that the shop press fits into. It is home made by some one and I got it from a guy after his shop burned down. It is to big to fit in my press well
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top