Texgasser1
Member
- Location
- East Texas
Gas engine Oliver 1250, Can a loader be mounted on it? If so what model loader would be suggested?
Gas engine Oliver 1250, Can a loader be mounted on it? If so what model loader would be suggested?
I agree totally, but I would never rule out a 1255 or 1265. Kind of a 3 cylinder version of the 1355 and 65. They were great little tractors too, but I'd say there's a far greater chance of finding a 550 (2-44) than any of the good Fiat built models.The Oliver 1210 loader was marketed at the little Fiat Olivers.
Now don't take this the wrong way, but with that said, I'd sell the tractor and find a 550 with power steering and a loader ready to go. Generally unless it's a 1355 or 1365 or white or cockshutt equivalent, your wallet tends to get lighter rather quickly with the Oliver Fiats, and that's if you can find parts. The gas model 1250 was not a reliable tractor and parts aren't really available.
I agree totally, but I would never rule out a 1255 or 1265. Kind of a 3 cylinder version of the 1355 and 65. They were great little tractors too, but I'd say there's a far greater chance of finding a 550 (2-44) than any of the good Fiat built models.
Ya, you could drop those later Fiats off a truck a 50 miles an hour and get on them and drive them away.Yes I agree to an extent. However if I was set on a reliable Fiat I'd look hard at the little turn of the century 90-00s models of Ford/New Holland Fiats. With all our vineyards around here it was not uncommon for the little blue Fiats have tens of thousands of hours.
I have heard they are not reliable, But a guy near me has a near mint one for $800, I figure for that price, I might just try my luck.The Oliver 1210 loader was marketed at the little Fiat Olivers.
Now don't take this the wrong way, but with that said, I'd sell the tractor and find a 550 with power steering and a loader ready to go. Generally unless it's a 1355 or 1365 or white or cockshutt equivalent, your wallet tends to get lighter rather quickly with the Oliver Fiats, and that's if you can find parts. The gas model 1250 was not a reliable tractor and parts aren't really available.
If I could buy a nice one for that, I'd grab it, but only as a collector tractor. I'd love to have one to take to shows and park it with my three David Brown built Olivers.I have heard they are not reliable, But a guy near me has a near mint one for $800, I figure for that price, I might just try my luck.
If I could buy a nice one for that, I'd grab it, but only as a collector tractor. I'd love to have one to take to shows and park it with my three David Brown built Olivers.
As Scooter eluded to, the gas version had an Italian military surplus engine and no parts are available anywhere. They had a complicated 24v electrical system. The governor was built right in to the generator, so they can't be converted. When equipped with a loader, they really should have the auxiliary pump that mounts above the PTO. If they don't have the drive gear for it, you couldn't run that pump even if you could find one.
They're a curiosity because so few have survived, but as a user, well, just about anything would be a better choice.
Let me ask you this, I think I will get it. It will cost me $800, I need to fix the headlight and a couple minor things. Would you be interested in buying it?If I could buy a nice one for that, I'd grab it, but only as a collector tractor. I'd love to have one to take to shows and park it with my three David Brown built Olivers.
As Scooter eluded to, the gas version had an Italian military surplus engine and no parts are available anywhere. They had a complicated 24v electrical system. The governor was built right in to the generator, so they can't be converted. When equipped with a loader, they really should have the auxiliary pump that mounts above the PTO. If they don't have the drive gear for it, you couldn't run that pump even if you could find one.
They're a curiosity because so few have survived, but as a user, well, just about anything would be a better choice.
I would be if it was in Michigan, but hauling it from Texas would cost a pretty penny. If you can find a cheap way to get it up here, then yes. If another collector was headed up here to get one and wanted to run loaded both ways..........Let me ask you this, I think I will get it. It will cost me $800, I need to fix the headlight and a couple minor things. Would you be interested in buying it?
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy