Oliver 1250 loader?

I believe the gassers had a frame didn't they? I don't know what particular "model" of any brand would fit. You'd just have to find a Freeman or some other short line loader that was off a similar sized tractor, then fabricate brackets. You can make about anything fit with a torch and a welder.
 
Gas engine Oliver 1250, Can a loader be mounted on it? If so what model loader would be suggested?


The Oliver 1210 loader was marketed at the little Fiat Olivers.

Now don't take this the wrong way, but with that said, I'd sell the tractor and find a 550 with power steering and a loader ready to go. Generally unless it's a 1355 or 1365 or white or cockshutt equivalent, your wallet tends to get lighter rather quickly with the Oliver Fiats, and that's if you can find parts. The gas model 1250 was not a reliable tractor and parts aren't really available.
 
The Oliver 1210 loader was marketed at the little Fiat Olivers.

Now don't take this the wrong way, but with that said, I'd sell the tractor and find a 550 with power steering and a loader ready to go. Generally unless it's a 1355 or 1365 or white or cockshutt equivalent, your wallet tends to get lighter rather quickly with the Oliver Fiats, and that's if you can find parts. The gas model 1250 was not a reliable tractor and parts aren't really available.
I agree totally, but I would never rule out a 1255 or 1265. Kind of a 3 cylinder version of the 1355 and 65. They were great little tractors too, but I'd say there's a far greater chance of finding a 550 (2-44) than any of the good Fiat built models.
 
I agree totally, but I would never rule out a 1255 or 1265. Kind of a 3 cylinder version of the 1355 and 65. They were great little tractors too, but I'd say there's a far greater chance of finding a 550 (2-44) than any of the good Fiat built models.

Yes I agree to an extent. However if I was set on a reliable Fiat I'd look hard at the little turn of the century 90-00s models of Ford/New Holland Fiats. With all our vineyards around here it was not uncommon for the little blue Fiats have tens of thousands of hours.
 
Yes I agree to an extent. However if I was set on a reliable Fiat I'd look hard at the little turn of the century 90-00s models of Ford/New Holland Fiats. With all our vineyards around here it was not uncommon for the little blue Fiats have tens of thousands of hours.
Ya, you could drop those later Fiats off a truck a 50 miles an hour and get on them and drive them away.
 
The Oliver 1210 loader was marketed at the little Fiat Olivers.

Now don't take this the wrong way, but with that said, I'd sell the tractor and find a 550 with power steering and a loader ready to go. Generally unless it's a 1355 or 1365 or white or cockshutt equivalent, your wallet tends to get lighter rather quickly with the Oliver Fiats, and that's if you can find parts. The gas model 1250 was not a reliable tractor and parts aren't really available.
I have heard they are not reliable, But a guy near me has a near mint one for $800, I figure for that price, I might just try my luck.
 
I have heard they are not reliable, But a guy near me has a near mint one for $800, I figure for that price, I might just try my luck.
If I could buy a nice one for that, I'd grab it, but only as a collector tractor. I'd love to have one to take to shows and park it with my three David Brown built Olivers.

As Scooter eluded to, the gas version had an Italian military surplus engine and no parts are available anywhere. They had a complicated 24v electrical system. The governor was built right in to the generator, so they can't be converted. When equipped with a loader, they really should have the auxiliary pump that mounts above the PTO. If they don't have the drive gear for it, you couldn't run that pump even if you could find one.

They're a curiosity because so few have survived, but as a user, well, just about anything would be a better choice.
 
If I could buy a nice one for that, I'd grab it, but only as a collector tractor. I'd love to have one to take to shows and park it with my three David Brown built Olivers.

As Scooter eluded to, the gas version had an Italian military surplus engine and no parts are available anywhere. They had a complicated 24v electrical system. The governor was built right in to the generator, so they can't be converted. When equipped with a loader, they really should have the auxiliary pump that mounts above the PTO. If they don't have the drive gear for it, you couldn't run that pump even if you could find one.

They're a curiosity because so few have survived, but as a user, well, just about anything would be a better choice.

Ditto. Collector value only, and even still, pray nothing goes wrong.
 
If I could buy a nice one for that, I'd grab it, but only as a collector tractor. I'd love to have one to take to shows and park it with my three David Brown built Olivers.

As Scooter eluded to, the gas version had an Italian military surplus engine and no parts are available anywhere. They had a complicated 24v electrical system. The governor was built right in to the generator, so they can't be converted. When equipped with a loader, they really should have the auxiliary pump that mounts above the PTO. If they don't have the drive gear for it, you couldn't run that pump even if you could find one.

They're a curiosity because so few have survived, but as a user, well, just about anything would be a better choice.
Let me ask you this, I think I will get it. It will cost me $800, I need to fix the headlight and a couple minor things. Would you be interested in buying it?
 
Let me ask you this, I think I will get it. It will cost me $800, I need to fix the headlight and a couple minor things. Would you be interested in buying it?
I would be if it was in Michigan, but hauling it from Texas would cost a pretty penny. If you can find a cheap way to get it up here, then yes. If another collector was headed up here to get one and wanted to run loaded both ways..........
 
Just an F.Y.I. The parts can be found! I have just about any part you may be looking for for the 1250 Gas Oliver's produced by Fiat. I kind of took up the challenge and have done the research to find the parts to keep the little tractors running. Let me know if you need help.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top