oliver 70 engine kit

Buy all your pieces individually and I"ve found that ebay is actually a pretty good source if you are patient.
Unless you find an old one on a shelf, there no longer is a "kit".
 
Kruse has it right. Also get yourself a copy of the HPOCA magazine that featured the Oliver 70. It featured some of the parts that cross over to 70 parts. Also if you have not disassembled the engine do so before you order parts. How do you know what sizes bearings the engine has and some of those sizes are NLA.
 
Maibach Tractor Creston Ohio 800.808.9934 They don't have kits but they have everything on the shelf. real good people to deal with very helpful.
 
like john said is money an object, I can get new sleeves and piston sets or just overbore pistons and you rebore your old sleeves, gaskets, most brgs and valves are not a problem, email me if need and I can help you
 
main thing i'm lookin for is pistons rings an sleeves if it is a sleeved engine. crank is fine an have new bearings which i purchased froom crankshop
 
money is an object too a point i dont wanna dump no 1,000 in parts in it , i,ve got plenty of other nicer tractors i'd rather spend 1,000 on in the engine, worse case scenerio i can bore it out an use oversize pistons in it out of something else. worked out good in a oliver 60 used pistons out of ford engine new ones of course alot cheaper!!!! i know this tractor may be green but it just isnt worth as much as the other green ones i own
 
it is sleeved, rings should be no problem, sleeves are not cheap and i can only get the 3 1/4 overbore size, be better off reboring your sleevs and put innew oversize pistons and rings, I can get those for you if needed, thanks Mike
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top