Oliver plows

PaBob

New User
Hello, I was looking at a john deere 2-14 trip plow, a friend also suggested a 2 bottom Oliver trip plow. My question is what model number of plow from oliver is a two bottom, Thanks'
 
How old of a plow? The old stand by is the model 100. A newer4240 can be either a 2 or 3 bottom. You are talking pull type, correct?
 
Yes, thanks for ideas the story is I have a 47/B tractor, and I am trying to look at some different plows, besides getting a model 44 john deere, and I was told that the oliver was a nicer unit? but they seem alot harder to find out about, Thanks stay warm;
 
Do you want a trip plow or hyd? The 44 JD is hyd.If you want trip you cant go wrong with JD #4 plows. Probably the most common is the 4B 2btm trip comes on steel or rubber and is a very strong well built very adjustable nice pulling plow. $250-350 gets you a nice complete one. Each to his own,but I like the nostalgia of a trip plow on steel as apposed to hyd. and rubber. Keep it all JD , the two will be worth more as a package than the two cost seperately. If you get in the clay it will be all the B wants so factor in "where" you want to plow.
 
Is your B an early 47 with the angle type frame or a late 47 with the pressed steel frame. Early tractor is 20 MAX PTO HP and altho rared for 2-14" forget it and max 2-12" or a single bottom. A late style gas tractor is 28 MAX PTO HP and can handle a 2-14" in some soils but in most you are better off with a 2-12". And the 44 is in both clutch lift and hydrolic lift. I would go with a John Deere because of the way the hitch is made in that you can adjust for a wider wheel tread if you want and if with a medium frame 44 deere plow you can adjust it for either 12 or 14" cut after you try it. Oliver you cannot do that and the way the hitch on the oliver is designed it works best with a narrow wheel tread (56") and I do not want to set the wheels in on a row crop that far. A John Deere A, 51 model that I had came with a set of olivers and the wheel tread problems along with clutch proplems are reasons I traded that Oliver on a John Deere hydrolic lift plow. And I have had both the small engine 20 HP and large engine 28 HP B tractors.
 
What, great replies BEING new to plow hunting is fun here goes I have a 47 late B 28HP I want a pull type NO hyd. no3pt just pull the rope down it goes I wear a smile get to the end pull a rope turn around etc. I want to know what is the last years Deere made these plows, cause I was told you can still get the parts etc. I was told it was a model44?? it sounds like it maybe something else.
 
What, great replies BEING new to plow hunting is fun here goes I have a 47 late B 28HP I want a pull type NO hyd. no3pt just pull the rope down it goes I wear a smile get to the end pull a rope turn around etc. I want to know what is the last years Deere made these plows, cause I was told you can still get the parts etc. I was told it was a model44?? it sounds like it maybe something else.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top