Oliver special tools

[Anonymous-0]

I have a leaking hydraulic assisted breakaway coupling. I would like to fix it. I need a special tool ST-151. Can anyone help me find one. Also interested in the special tools like the spanner sockets for pto on a 550 and 1550. Thank You

 

[Darrin L.]

I also am looking for an Oliver special tool. I am am looking for the lifting eye/bolt that will thread onto the lifting head bolts of an Oliver 1850 310ci. waukesha gas motor. Sorry dabot, didnt mean to answer your question with another tool wanted but I thought somebody might know where some is at. Thanks!

 

[e]

I do have the spanner sockets for the over/under output shaft nut and will soon have the sockets for the for the hydra power output shaft nuts (they are 1/2" drive).

If there is enough interest in a spanner socket for the nuts inside the PTO's, I can make those too.

What I'm really looking for is someone who has a 2255 apart so I can get the dimension for how deep the spanner socket needs to be to get to the 2255 over/under output shaft nut. I've had a few guys come to me interested in sockets for those, but no one has the dimensions.

 

[Anonymous-0]

I assume that the couplers are leaking when the hoses to the remote cylinder are not attached.  The easy fix is to use male couplers with a pipe plug installed instead of the hose, plug it into the coupler.

 

[Anonymous-0]

Do a little looking, Some of the industrial suppliers will have those. Also when I started the ones we used with the 1/2 inch bolts were all homemade.

 

[Anonymous-0]

Thanks everyone. I'll try to make one. Good luck on finding the eye bolts Darrin. Duane

 

[johnc]

call 1-180-808-9934 maibach tractor
they have them for sale.

 

[ShepFL]

Nice !!
Wish I had that a few yrs. I ended up cobbling up a piece of pipe.

 

[Jack Watkins]

This is a picture of a homemade spanner wrench. Could not find a loaner or one to purchase so homemade and handy. Used to replace seals in 550.