OT..looking for a tool

plow hand

Well-known Member
Hello,bare with me now,I'm looking for a tool that is used for crimping the clamps that go around C.V.boots on drive axles..what is it called ?
 
www.grainger.com Item number 4e607, cost $29.65. They also have clamps. I bought a set 10 years ago and used them about two times. It is called a straight jaw pincher. Probably get them at Mcmaster Carr also. DH
 
Your local auto parts should have them for rent. Unless you are a professional wrench, you will never use them enough to cover the expense..
dave
 
I and many around here use large (stonger) and longer electric nylon tie straps, ( you can purchase these at electrical/plumbing supply stores) or even the regular ones... just pull them up real tight with needle nose or vise grip pliers.
Jim
 
It"s called a CV boot clamp pliers, part number 30800 from Matco Tools. Costs about $36. It has a center plunger that smashes the crimp as it squeezes it, making the crimp stronger. For fuel lines, there is a tool called an oitiker pliers that crimps the same, but doesn"t have the center plunger.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top