Ot- Pipe fence

[Keith Harpster]

We have been building fence around barn lot and several small lots. Using 20 foot sections of continuous fence with 2 inch square by 1/4 wall for line posts and top rail. I got a good deal on some 5" by 5" square steel for corners. Wondering what other folks have used for corral and lot fences. What some good other ways to bulid this kind of fence.

 

[keh]

Looks great. I purchased the corral panels made from about 1/4 inch wire welded in 6? inch squares. Put in red cedar posts 6 feet apart. Bolted 1 1/2 by 6 inch oak boards above panels. Made loading chute of 5 six inch boards high for a total height of about 6 feet. Some locals have made loading chutes of old highway guard rails. Yours is as good as I have seen.

KEH

 

[Anonymous-0]

Thats a very good looking fence. All straight and standing tall. Also your barn looks very neat and well kept.

 

[Allan in NE]

Wish you would bring your gear and come spend 10 days at my place 'cause you obviously know what you're doing.

After sixty some years, I've come to the stark realization that I'll never be able to nail two boards together nor lay in a straight corral. :>(

Yours looks like a picture postcard. :>)

Allan