painting tin

Anonymous-0

Well-known Member
Heres my situation. Got a good deal on a used 18x40 metal building. Got it up and working. Question, I would like to repaint it to better match the house. What kind of paint would should I use and what prep to keep it from peeling? Have seen many painted with enamel but it peeled in a year or two.

Thanks
 
Something like that, there may be some research involved to determine what is existing and what is compatible, you need to research product data from materials you are thinking about using, to see what the surface prep is going to be and if the product will provide a good bond to the existing, or like you mentioned, it can delaminate and fail. Good idea to investigate this, temperature can also play a role in this, lot of variables to look at.
 
Use latex exterior satin finish house paint. I have been doing this for 10 years and never had a problem. If you have rust then use Rusty Iron Primer from Rustoleum wait 5 days then paint with any good Latex paint.
The latex will bake on from the suns heat Once it is baked on it will last as long as factory colored steel.
The only thing to be careful about is to make sure there is no dew on the steel before you paint as it will bubble under the paint.
I pressure wash the tin before I paint and usually wait a couple of days to make sure the moisture has evaporated before I paint.
 
I go to Sherwin Williams and ask their advice, since they are supposed to be the experts. So far, I have gotten good advice.
 
Cummins Man is confused. I have done this on many metal buildings dated 13 years ago up to the present and they all look good today. There is no reason for me to give bad information out and I stand by my recommendation. I do this for a living and do no advertising. If it didn't work I would have no business.
 
I'll second asking Sherwinn Williams. They will likely recommend using an emulsifier additive with whatever paint you use, and a bleach water wash before you paint it to remove paint oxidation, mold and mildew.

Good Luck,
Bill
 
I put about five sheets of old galvanized roofing steel on the outside wall on the corner of my wooden barn about twenty years ago. A couple of years later when I painted the barn with a white latex I sprayed the galvanized tin too. Now, fifteen years or so later the paint on the tin is holding like a champ, but the rest of the barn needed to be re-coated five years ago. Jim
 
Painted my garage doors (metal) about three years ago. Went to S-W and they said use an oil base primer and latex top coat. I bought the highest price paint they had. Doors turned out excellent and are holding up well.
 
NEVER use Behr paint. It doesn't dry. If it does by some sort of miracle, it dulls when you rub it with your hand, and the color washes.
 
Ron Anderson BTDT worked great,,, just make sure no rain is in the forecast and you are good to go,,, last one i painted it rained around 4 hours after I painted it,,, got lucky and it did not harm the finish,,, still look"n good after 8 years
 
You probably should clean the metal surface thoroughly and use an acid (wash)primer. I painted my wheel weights 30 years ago with it and they still look good and I never put a top coat on them since they were a nice blue. Hal

Here's a web site to get info on it.

http://www.paintcenter.org/rj/jul02k.cfm
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top