parts for case master cyl

[tmoore45acp]

does anyone know NAPA part no. is for rebuiding master cyl. any help is apperciated thanks (case wants 150.00 for rebuild kit)

 

[Anonymous-0]

DON'T rebuild them just get rebuilt ones from NAPA take the old ones off they have a number on them last ones i got were 24.00 with a 50.00 core charge BUT they are getting hard to get

 

[tmoore45acp]

i am in luck-NAPA store is one blk from me so i will give them a try-thanks TM

 

[tmoore45acp]

went to every NAPA store within 25 miles of huntington wv and no store could help me with these master cyl.(i have the old style not the ones with canning jar fill cap). any other thoughts on these masters. thanks Thomas

 

[Anonymous-0]

your Napa stores are full of shi- they are Wagner masters did you find a number on them? I'll look for the receipt with the part number. but it was well over a year ago that i changed the last ones if you got the number off them go on line and run the number and the tin cap ones are what i replaced last year. and when you replace them you must poke a hole in the rubber inner cap so when they get hot it will not apply the brakes

 

[Anonymous-0]

you can use the tin cap ones

 

[Anonymous-0]

Google case 450 brakes and you will find a lot of things . Equipment parts source has new for 122.00 each but Napa is cheaper for rebuilt but i can't find the part no