performance parts

I just had my 50 8n overhauled in november 08. I bought 4 new 4 ring pistons from newholland tractor. the 8n is alot stronger than before. Now the tires will bog down in 3rd while diskin instead of choking out. My oil pressure runs at 50 psi at 2000 rpms and 20 idleing. All you may need is to rebuild it.
 
Jeff........the low compression (6.5:1) flathead engine is governor'd to 2200rpms max. Iff'n you even lightly mill the flathead 0.065" (1/16") yer pistons will be banging the cylinderhead.

Howsomevers; Supercharge it!!! with a 454 Chevy smog-pump. Google "Dirt Cheap Supercharger" by Steven Richmond for ideas. Us a carb from the NAA so the carb faces the smog pump. Brackets are on you. Should change yer 26hp 8N engine to a fire snortin' 40hp traction burning beast. Read some "Hot-Rod" books about supercharging. Don't mess around with turbo-charging, thats for hi-rpm engines.........Dell
 
(quoted from post at 15:11:20 12/02/08) thinks they really can supercharge a N engine using a chevy smog pump is dumber than a bag of hammers.

If it makes you feel better, you could probably use one off a 460 Ford!
 
Jeff:

"Performance parts," aside from slight overbore kits and the rare Sherman high compression heads were never offered for Ford flathead tractor engines because these are low speed torque rather than HP engines.

It was once rather common to remove the sleeves and use Mercury 259 pistons in the bare block to gain a few cubes but I have not seen this done for many years. Even then this was more of a poor mans rebuild rather than a performance upgrade.

HP cams were never offered for flathead N engines.

About the only "performance" part available today is the dual exhaust manifold, claimed by some buyers to increase HP 25% or so but I would ask to see the before and after dyno slips before spending the $450 or so for it.

You can increase torque a bit by increasing compression. If your engine has the original (uncut)8N cylinder head it can be milled .060 without creating problems but only if the block has not been previously decked. Also, if your engine has been rebuilt with flat top pistons, you can rebuild it with the late 8N pistons, which are slightly domed.

There is not much else you can do to increase HP without affecting useability by increasing RPMs.

Dean
 
i normaly dont post on this kind of stuff, but it irks me when one of the most knowlegable people on here takes a hit by some @#$%^ who then doesnt even have the guts to post with his real name, the smog pump supercharger idea does indeed work, has been done many times on many different applications,"sometimes, if you'd open your eyes and read, you wouldn't appear nearly as dumb"
 
Anyone who is too spineless to post under thier own name while flaming others needs to man up and get a 'pair' and post under their real name or handle so that their comments can be correctly argued.. and not just sit back and take potshots from the peanut gallery.

remember.. IP address's are REAL easy to track down / back...

soundguy
 
As the others are telling you.. you can get a little more displacement with the OS pistons running bareback.. and alil more compression with head work.. even more.. if you relieve the head after cutting it farther than you should.

past that.. flatties just have breathing problems...

probably add an e-ignition and a few other goodies and have an N that is still bumping shoulders with an average NAA...

soundguy
 
I've had the dual exhaust /crossover manifold kit on my '46 2N for over 2 years now, and i'm glad i spent the money for it. My tractor has good compression and this gave it a very noticable boost in power with no ill effects. As long as the engine is in good shape, I'd reccomend it completely. My tractor has loaded 12.4 tires and rear wheel weights and scales 3600# without driver and it handles this weight quite well and has lots of pulling power on hills in both low and high range 3rd. It has a Sherman step-up tranny.
Mr. Bob
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top