piston ring replacements

alwaysoar

New User
Without spending the money on "Ugly Betty" to buy the whole overbore kit, I want to re-ring the pistons. The sleeves are worn oversize so standard rings are too small. I got the overbore rings that I thought I could file down, but this does not seem like a good idea. Where can I get some rings that are say .015 oversized, or what do you think about the ideal of filing the 3 3/8 rings to fit? Thanks for your help.

Ed @BTV VT
 
having similar problem, bought hastings rings but were too thick for compression groove on piston, asking around to see if others have had the same problem. did you have any luck with getting rings that fit? thanks
 
I really have not had much luck. 8N and 9N Fords have oversize rings available, but Fergs do not. What I have done is order 3.375 rings and file them down to fit. The only apparent problem is that the rings are too narrow for piston grooves. I have friends who grew up with these tractors and did "field" overhauls who say don"t sweat it. We"ll see. It seems ridiculous that nothing oversize is available. My cylinders have no scoring, they aren"t out of round, the pistons have slight scuffing but are useable, there"s no play in the pins, so why should I buy the entire overbore kit?
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top