J. Schwiebert

Well-known Member
My boy and I were talking tonight about who still plows. We could only come up with one farmer. How many still plow say within 6-7 miles of you?
 
Guy in town just bought a 10 bottom last winter to pull behind his 450 Versatile. We still plow on rotation to.
 
SE Illinois. No one plows, except maybe a garden or two. But most gardens are roto tilled. Big operators turbo till,or disk field cultivator rolling basket tools. Then plant into a stale seed bed.
 
I think I’m the only one and that’s at a plow day!!
cvphoto62363.jpg


cvphoto62364.jpg
 
I quit using a moldboard plow for wheat ground back in the 1980's when I was farming.

Instead, I used a 9 shank chisel plow and disced it down with a tandem disc. It did just as good a job, went faster, and you didn't have dead furrows and back furrows to bounce over.
 
We still try to plough each field about once every 5 years. Severs around me do the same. More and more land is just burned down with spray, and no tillage. Only way these guys with several thousand acres can get over it all. On some land it works ok, while other crops never seem to do very well. I have seen land that was no till for several years get ploughed over once yields dropped due to compaction.
 
I got a 6 bottom plow for my newer tractor a couple years ago.last year it was so wet I was lucky to get done with the chisel plow, this year I broke a rib and didn’t feel like putting with it just chisel agsin.....

One of the bigger farmers around here plows all his corn stalks with molboard, tracked tractor and 16 or so bottoms.

Several others plow from time to time. Lot of new Salford plows sold around here the past few years.

Paul
 


Loren the ACG is a plowing enthusiast. He will advise you how it woks much better than no till and chiseling/deep ripping.
 
A good many acres are plowed here but the plows are horse drawn as we have a lots of Amish. I did have a plow day last summer and plowed 20 acres. I have a few creek bottom fields that I will sometimes plow. Tom
 
I saw one field plowed about 15 miles west of here yesterday, some old sod. Otherwise, nobody. Minimum till or no-till. Our plow hasn't left the shed since 1989. Not missed, either.

Mt father-in-law still plows in East central IL, but he's organic and wants to turn under sod.
 
The soil in west central Stearns and into Pope, Kandiyohi, and Meeker still respond better to moldboard plowing than chisel or ripping. It’s not everybody, but there is still a demand for plows and it’s not uncommon to see a plow or a plowed field. The Plowman’s Association still has a strong patronage in this region and one of the 4 generation daughters has many state and national trophies.

I happened to be watching The Minnesota Millenial Farmer last night and he was setting up for strip till banding in his bean ground. With Trimble that is entirely possible, but it makes me wonder what Pa would think.
 
Here's an article from almost 40 years ago and the concept wasn't really new then. Wikipedia says the concept fired up in the 40's when an author by the name of Faulkner wrote THE PLOWMAN'S FOLLY. Anyways, this article is interesting and not too long to read through ....
Untitled URL Link
 
Probably not a moldboard or turning plow within 50 miles of me. Everything is minimum or no till.
 
Neighborhood dairy farm went organic about 15 years ago and went back to moldboard plowing. It was the only way they could suppress the weeds. They spread their cow manure in middle to late May and then plow and plant immediately. Everything gets to start from ground zero that way. And it's plenty warm enough to get fast germination on what they planted.
 
Here in our area, we still see some moldboarding. The farmers who grow seed corn moldboard every year. It is certainly not a large amount of acreage.
 
Here in Kentucky locally, all tobacco ground is plowed. For corn or beans, some no- til, and at least on just discs and plants. Mark.
 
Here in Kentucky, locally tobacco ground is plowed. Beans and corn are mostly no-til, but at least one discs and plants. Mark.
 
Many around here do some every year. Not so long ago there wasn't much, but it's come back some now.
 
I see the results that Loren and SV get with plowing and it impresses me. I also have enough hills here that I see the erosion on ground that I do not keep covered. My grandfather bought and built up ground in northern MO with rotation, green manure and plowing. I would think that a long term mix of rotation, plowing, no till and ripping would be optimum.

I have decided not to plow, mainly because I do not want to make the effort. I have had a lot of large equipment on fields and waterways this year due to debris removal from the Derecho, so plan to rip everything, then run soil finisher over it and early liberty link beans on all. I will then reestablish the grass and cover crop the fields. I have had some erosion even with no till, so plan to convert all my headlands to grass hay so I can contour plant. Moving forward, I will plant deep penetrating cover crops on the years I run beans, as winter comes too early here for successful cover on corn.
 
No one I know of. My mold board plow has been parked under the trees for the last forty years. Have thought several times of hooking it up and plowing to clean up the moldboards and parking it undercover but never did.
 
I still do to break out old alfalfa and usually during the rotation years for a field between alfalfa crops. I am not taking a field out this year but next time I will still plow down the old alfalfa crop and then I am going to try something different for the between years. What few of us are left in the Salt Lake Valley of Utah that irrigate , mostly flood, have two way plows. The few dry farms that are left have went away from the big one way disc plows to burn down and a trip through with the sweeps on the fallow year before replant.
 
I think plowing in some parts of the country would be irresponsible but out here we don’t know what erosion even is
 
Here in our furrow irrigated ares of Western Colorado,most everyone plows.We plow to bury trash,and use two ways so no dead furrow or crown is left.If we dont plow,our water will not go through. Trash dams up the furrows and washes across,leaving 'canyons and dry spots. A few center pivots are starting to show up. Those guys are useing alternative methods or going notill..
 

The soil in west central Stearns and into Pope, Kandiyohi, and Meeker still respond better to moldboard plowing than chisel or ripping. It's not everybody, but there is still a demand for plows and it's not uncommon to see a plow or a plowed field.

Last time I was to the family farm in SE Kandiyohi county, I passed a big quad-trak with a very long moldboard plow on US71 S of Belgrade.

My mom's renter does not plow, uses a Dominator 4850 disc ripper. My late Dad stopped plowing bean stubble in the mid 80s and used a sort of chisel plow that had large sweeps on it. Still plowed corn stalks till the end in '97. The soil on the farm has a lot of low areas that in the past really needed to be plowed to bust up the packed died mud. A lot of tile has gone in and conditions in those spots are much improved.
 
I am not going to get into the virtues and pitfalls of conventional tillage versus
no-till. Both practices are used around here.
Everyone has their reasons for what they do. My one remaining uncle on this farm is
nearing 88 years old and his brother/partner passed a little over a year back. We're not going to spend big bucks to go no-till with the future of the farm being in the
family much longer is questionable. My deceased uncle had 4 boys and they could not
wait to get out of Dodge when they graduated from high school. They now own 1/2 of
the farm and all they can see is $$$$$$$$ from the sale of the farm. No desire to
keep it in the family and operational. We did upgrade the old 70's CASE 5x18 plow to
a much newer 6B vari-width last week though, so moldboard plowing will still be in
the tillage program and I just help out and not on the farm payroll so labor costs
are minimal.
We purposely were looking for a WHITE plow, because the Case had Radex conversion
bottoms on it and all the ware parts interchange.
Today I am going to fabricate a hydraulic landing system on the plow so it will
follow the tractor consistently on our sidehills no matter if I am turning furrows
uphill or downhill.
Loren
cvphoto62398.jpg
 
The BTO across the road from me who farms over 5,000 acres started doing some chisel plowing a couple years ago. He did some moldboard plowing this fall after he took corn off and before planting winter wheat. He does a mix of no till and chisel plowing for corn and some no till and some disking before soybeans.
 
Some of the farmers around here plow - neighbor across the road does. I also plow my garden but it's only around an acre and there is the occasional plow day.
cvphoto62401.jpg
 
I plow as little as possible due to rocks. Bought an offset disc last year to help leave even more rocks in the ground. So far I'd have a hard time wanting to hook the plow up again soon.
 
I can chime in with this experience. My Brother and I no-tilled that last several years we farmed the dry Kansas ground. Once every year though, I would host a plow day on 60 - 80 acres of our ground. I would rotate to different ground every year. This is wheat ground for the most part.

I will promise you that the following year, the wheat that was planted on the plowed ground would out-perform all of the no-till ground, to the tune of 5% - 8% better. There is no doubt in my mind plowed ground is better than no-till, but when you take the cost to work the ground vs no-till, it's hard to justify. Go to Case/IH and spend close to $90.00 a piece for shears, even though I know you can buy cheaper, but just a note.

On the other hand, when I would have a plow day, I would get all sorts of tractors and plows. Most plows were not set, and half the guys didn't even remember how to plow. Some would go 4" deep, some 10" deep, some 1 mph, some 10 mph...lol! My Brother, who was not into old tractors at all would just shake his head and complain of the poor job. I would just remind him that one pass over it with the chisel or heavy offset would clean the mess right up. It was all in fun. Since we quit farming and rented the ground out, I have not had, or heard of a plowing bee in the last 4 or 5 years. It was a good time. Bob
 
Some of the old plowin pictures. Had to get a green one in there. These are some of the later pics. I loved plowing with the Big 500 and 3x16 plow. I also did a lot with a D and 3x14 trip lift. My good friend on his D at the bottom. It was big fun back then. Just random pics from the past. Bob
cvphoto62402.jpg


cvphoto62403.jpg


cvphoto62404.jpg


cvphoto62405.jpg


cvphoto62406.jpg


cvphoto62407.jpg


cvphoto62408.jpg
 
With the exception of local shows and clubs that host plow days, nobody has plowed around here in many years, but plows at auctions around here still bring good money for nobody actually using them
 
Neighbor has a field across the road from my house that is corn every year. 130 or so acres.
He plows it every year. He rotates corn, wheat and barley in most of his other fields. If he plants grain
after corn, he just disc's it down and seeds it. If he rotates alfalfa, he plows the alfalfa and disc's
it smooth, then seeds it. South central Montana.
But very few other farmers plow here, even the sugar beet farmers.
 
Could have used coulters on this piece there was a mat of morning glory that would plug me uo once in awhile
cvphoto62420.jpg


cvphoto62421.jpg
 
I have not moldboard plowed in years. To me it's just a double expense, however turning the ground over every 3-5 years is probably not a bad idea.
 
(quoted from post at 10:15:42 11/09/20) Some of the farmers around here plow - neighbor across the road does. I also plow my garden but it's only around an acre and there is the occasional plow day.
<img src="https://www.yesterdaystractors.com/cvphotos/cvphoto62401.jpg">


Fordy20, now I get your handle, LOL.
 

Don't really think anyone stopped around here, but my local area is mainly livestock farms.

I plow some hay land each year, turn the sod under and reseed.

This field hasn't been plowed in at least 40 years, just a poor stand of hay.


mvphoto64661.jpg

[/img:30c6949e19]
 
We plow... Its the only way to tear out old sod/alfalfa stands.

I tried chiseling some a few years ago.. after 2 passes with the chisel, then 2 passes with the offset disk and it still wasn't as clean as when I fall plow it and then disk it in the spring.

I have a jd 4200 4x18 rollover and keep wondering about going to a 4 or 5 btm switch plow..
 

495 man, they say that a picture is worth 1,000 words. Your pic is an excellent wordless explanation to show someone when the question comes up about how to get started when plowing both ways. It may be only once or twice a year but it seems to be a difficult concept to get across without a picture.
 
(quoted from post at 18:47:40 11/09/20) That is a crazy straight furrow. I don't know how you do it.

No autosteer :-)

When I lay out my lands I measure/guess the headland center point and put a long piece of bright orange marking tape on a tree at the center point. Drive to opposite end and and measure/guess the opposite headland center point and aim the tractor towards the marking tape. Drop the plow and drive straight to the bright orange tape in the tree. No looking backwards! Have to trust the plow is set correctly. I've used stakes & tape if no tree at field edge.
 
(quoted from post at 04:17:21 11/10/20)
495 man, they say that a picture is worth 1,000 words. Your pic is an excellent wordless explanation to show someone when the question comes up about how to get started when plowing both ways. It may be only once or twice a year but it seems to be a difficult concept to get across without a picture.

Thanks. You are right, it's only a few times a year, in that 12 acre field I did it twice.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top