Preacher's 2n

grandpa Love

Well-known Member
He had a buyer lined up but we couldn't
get it to run right. Linkage from
governor to carb was broken and badly
welded, caused all kinds of weird
issues. ArlenOR mailed me a linkage.
Popped it on and with very little
tweeking it's actually a great running
tractor. Sure was glad to see that one
leave here!! Did a ton of work on it.
Hope Arlen's bill ain't too high! Next!
Lol
 
That's sort of like this Case VAC I have been trying to get to run. It will fire and maybe run a few seconds but that is it. Swapped carb with a good running VAC has new plugs, new points cap and rotor but yet will not run. Been to wet to get back to it so been sitting a few days again
 
Old use your own troubleshooting chart.Make sure you have a good blue spark that would jump at least 1/4.Make sure your air breather is not blocked up with hornets nest or such other thing,make sure you have a good flow of gas from the carb for at least 3 min,use a coffee can to catch it or such other thing etc etc etc.troubleshoot the problem before you spend $$$.If you follow this steps I think you'll get it going
Good luck
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top