Anonymous-0

Well-known Member
I pull a hot farm case 1175 and am thinking about getting in to anique pulling and know nothing about it. I got to stay with
case so what models make good pullers.
 
Don't know how old you are looking to go, but I've seen some stout pullin' 400 / 700 / 730. I know Don Livingston pulls with an LAI.
 
I pull with several older Case tractors. I have taken home many first places with my 49' LA. Mostly percentage pulls. Pulls consistent at 165%. 4 3/4" bore. High comp. head. Weighs 8020 lbs. 18.4 x 30 tires
 
I have a 37 c-c case puller lp heads fits low gear rules as has c 31 tooth sprockets NATURELY the rest is pure stock. The box of blue ribons do not sell with the tractor 812 798 1222
 
There are several good Case pullers, probably the best are CC or DC models w/38 inch rear tires, also the 500 or 600 w/34 inch rear tires. Both of these choices will have a high drawbar which is very important, especially in the "stock" classes. Good Luck, thanks for staying with Case! Don
 
do the 500 and 600 have the same engine blocks as my 504 case? how rare or hard are those tractors to come by? thanks again
 
I pull with a 900 diesel in 8650 and 10,500. I really like the balance of the tractor, and it's done very well so far. They are reasonable to buy also. If you twist my arm, I might trade you for your 1175!
 
A farmer that pulls here runs a 730, 830, 1030 & 1175. Runs the 730 (narrow front) in 6500 and 830 in 8500. Those two classes are usually 16 tractors each and he almost always places in the top 5 with both.

Knew a guy too that used to pull in 5000 lbs. class with a 700. Don't know how he made weight but he won the class 4 times in 5 years.

A DC would be a good tractor for 5000 or 5500, maybe even 6500 at some places.
 

I think 504 will fit any gear drive rearend.Like back to 400, but willnot fit chain drive rearend (500,600 not even 930 six speeds) Steve IL
 
depending on what year you can run case 800 gas 6000 7000 8000 has casomatic trans if they allow t/as and such if not 700 is the same with just the 8 spd direct you can run 16.9 38s 1 size over 60 hp easy with simple tuning,good gear selection and balance nice just take the pto/hyd housing off the rear and make a flat plate and get some 23 degree firestones
 
No they don't. The 500's are pretty easy to find, the 600's are pretty difficult as they were only made 1 year. The 500's had both 30 inch and 34 inch rear tires. That makes a world of difference for pulling. Don
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top