Question about using a quick hitch

dsebens

Member
So I just acquired a quick hitch. Is there any reason not to use the bolt that holds the top mount together on the implement for the quick hitch hook?
 
There part circled in blue is what Im talking about. Seems like thats what you would use with a quick hitch.
mvphoto63361.jpg
 
I have to agree with the others. Just a matter how the quick hitch (once attached to tractor) lines up with your implement. My top hook lines up with the
upper bolt of the implement rather than the lower bolt as you point out. That's on a Kubota L3200. Wingnut
 
quik hitches are nice sometimes! they don't work on all implements! figure out which do and which don't. figure out why that some don't. sometimes just a
small tweek does it, on others, it's a lost cause. i had an hyd 3 link that i thought helped.
 
I have both category 1 and 2 John Deere quick hitches. For all of my JD
implements (chisel plow, disk, box blade, back blade, sickle mower), that
is the point you use for the top hook.
 
If you're talking about a category 1 quick
hitch they are notorious for putting the
top pin in different spots. Different
manufacturers have their own standard.
That's why most cat 1 quick hitches have
adjustable top hooks like mine.
cvphoto59340.jpg
 
(quoted from post at 07:16:18 10/14/20) If you're talking about a category 1 quick
hitch they are notorious for putting the
top pin in different spots. Different
manufacturers have their own standard.
That's why most cat 1 quick hitches have
adjustable top hooks like mine.
<img src="https://www.yesterdaystractors.com/cvphotos/cvphoto59340.jpg">

Is that think on your top link a brush cutter attachment? For the ones that wont hook right?
 
That's a Heavy Hitch trailer mover and
weight bracket hooked up to my quick
hitch. I can get different pictures if
you like. The Heavy Hitch is really nice
when I use the loader to clean out my
livestock shed. It's to tight to hang an
attachment off the back for counter
balance.
 
(quoted from post at 07:38:19 10/14/20) That's a Heavy Hitch trailer mover and
weight bracket hooked up to my quick
hitch. I can get different pictures if
you like. The Heavy Hitch is really nice
when I use the loader to clean out my
livestock shed. It's to tight to hang an
attachment off the back for counter
balance.
I meant the flip over thing on your tractors top link pin
 
Oh ok, yes it sort of is. You remove the
top hook completely and attach that. It
allows the rotary or finish mower to
float. I got rid of the finish mower and
just left it on.
 
No, normally use the regular hook up pin hole, or the geometry is all wrong.

But, not every time is normal...........

Paul
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top