(quoted from post at 03:57:06 10/16/20) If you indeed have 13-24 tires on your 9N, then you will need to replace the entire wheel assembly with one from another 9N to get to 11.2x28.
The wheel centers would have to be cut down and welded into a 24" rim. It's not practical to go back the other way unless you use parts off another 9N.
Now are you sure you have a 9N? If it was an 8N, I think it would be rather trivial to mount a set of old combine tires on there, which would explain why it ended up with 24" rims.
(quoted from post at 13:25:24 10/15/20) I have old 13-24 tires on the rear of one of my 9N's. They are shot and I blew the tube putting air in one of them. Is there a smaller tire I can put on. the 13-24 is really fat and I was hoping to get something like the 11.2-28's that are on my other 9N
(quoted from post at 13:25:24 10/15/20)
I'm thinking taking the rear tires off the tractor myself and taking them in to be mounted with tires I can buy online.
I would appreciate folks sharing their experiences on how they changed their back tires.
(quoted from post at 13:25:24 10/15/20) I have old 13-24 tires on the rear of one of my 9N's. They are shot and I blew the tube putting air in one of them. Is there a smaller tire I can put on. the 13-24 is really fat and I was hoping to get something like the 11.2-28's that are on my other 9N
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy