How can someone test an automotive item remotely without lugging a 12 volt battery?
I would like to test the trailer brakes on a trailer. It is an old trailer that currently does not have the emergency battery hookup on it (It will when rebuilt.). I also do not want to test using the wire hookup to a truck (I think the wires are damaged.). I would like to apply power as close to the brake actuator as possible to verify its function and rule out any other faults. The trailer is to be rewired anyway, so cutting the wires to test is not a problem.
Someone suggested that I use a portable jumpstart unit. Simply hook the jumper cables to the wires in some manner, tun on the jumper unit, and see if it works. My concern with the jumper unit probably supplies more amperage that the actuator was designed to handle. Am I correct? Would this be a problem? What else might I do to test this or anything else remotely?
I would like to test the trailer brakes on a trailer. It is an old trailer that currently does not have the emergency battery hookup on it (It will when rebuilt.). I also do not want to test using the wire hookup to a truck (I think the wires are damaged.). I would like to apply power as close to the brake actuator as possible to verify its function and rule out any other faults. The trailer is to be rewired anyway, so cutting the wires to test is not a problem.
Someone suggested that I use a portable jumpstart unit. Simply hook the jumper cables to the wires in some manner, tun on the jumper unit, and see if it works. My concern with the jumper unit probably supplies more amperage that the actuator was designed to handle. Am I correct? Would this be a problem? What else might I do to test this or anything else remotely?