Remotes for 1650

I have one Question in regards to dual remotes for a 1650. I have two levers that operates the remotes for external hydraulic cylinders.
One is already plumbed, with hoses, and quick connectors, and the other isn"t plumbed yet. I have the hoses here, and quick connectors to do the other side, and would like to have the other remote working, that way I can operate two external hydraulic cylinders.
I have located two plugs on the housing for the hydraulic reservoir, on the right hand side, opposite of the hydraulic hoses on the left hand side of the housing for the hydraulic reservoir.
Now for my question, is there any thing more that I have to do, other than do the plumbing for to get the remote to operate a hydraulic cylinder? Thanks. Bruce.
 
Should be able to just plug in the hoses and go to work. Our 1600 is the same way, and I too have the couplers and brackets and all that, I juts need to hook it up.

We don't really ever need to use 2 sets of remotes with that tractor, but once it's set up you never know....

Donovan from Wisconsin
 
Thanks Don-WI for the reply.
I have a Fork Lift that I use around the farm, and I already use one remote to lift and lower the boom, and I would like to install the Hydraulic Cylinder in place of the Top Link, that way I can tip, or tilt the Boom, one way or the other.
Also I'm planning on mounting my Snow Blower on the front of the Tractor, and I'll be needing the other Remote to operate the Cylinders for lifting and lowering the Snow Blower, and the other to operate the Hydraulic Cylinder for the Chute. Thanks. Bruce
 
Don: There are more uses for the second set of remotes than there are for the 3 point around here. Does your fork lift have a seperate valve?
 
We do have implements which require both sets of remotes, including our chopper and hydro-swing haybine. The haybine is 14' and the 1600 not having fluid in the tires would be a bit too light to run it. We run it with either our Massey 285 or the 1855.

The chopper is 1000 RPM and only goes on the 1855. I would like to make mounts for the front of the 1600 for a snow plow, then I'd need 2 sets for lift & angle.

Donovan from Wisconsin
 
The Fork lift is an attachment that mounts on the three point hitch of the Tractor, and the Boom of the forklift has a two way hydraulic cylinder, and I have another two way hydraulic cylinder to put into place instead of the Top Link. I also have to build a mounting bracket to be able to accept the hydraulic cylinder at the tractor end of the hydraulic cylinder. The forklift already is set up for to receive the hydraulic cylinder, so that part is ready to go.
 
How do you fill your grain drill or corn planter? Most people around here have an auger on the drill that runs off a hydraulic motor, plus hydraulic markers + lifting and lowering the drill + the hydraulics apply down pressure on the openers. They have 2 tractors now with 3 remote outlets. Hay is gone and we used to sell both Fox and Geil at one time.
 
We fill our drill with bags and sacks- We ussually only seed down up to 10 acres with our drill. We clean our own oats and put the clean seed in the plastic feed sacks.

We ussually only plant about 25-30 acres of corn each year as well. We used to buy fertilizer in bags, but you know that sin't worth it when you buy a lot of fertilizer. Last year we borrowed a neighbors wagon with an auger for fertilizer and we pulled that with another tractor, running the auger off of that tractor. Other years we pull the gravity box with our loader tractor, and fill the bucket with fertilizer and then bring the tractor to the planter and scoop it with pails into the planter. Not the easiest, but after using bags of fertilizer for years it really isn't that bad.

Our grain drill is rope trip so it requires no hydraulics, and our planter is a 495A which only needs one set of remotes.

P1000352.jpg


P1000529.jpg


Donovan from Wisconsin
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top