resistor spark plugs for 9n ford with pertronix

[mrhud]

looking for a resistor spark plug for 9n with pertronx ignition thanks hud

 

[HFJ]

i just used carbon suppressor wires on my existing plugs. works fine.

 

[JMOR]

You don't want "opinions".....go to the source....Pertronix!

 

[mrhud]

useing resitsor wires also

 

[Mike Groom]

Directions tell you to use resistor wires, plugs do not matter.

 

[Jim.ME]

useing resitsor wires also

As noted checking with Pertronix might be wise. In any case, if you want a resistor plug, just take the plug number you are running now to your local parts store and ask them for an equivalent resistor type plug. Your plug number will get them the type, thread pitch, plug reach and heat range info to make an interchange.

 

[used red MN]

Directions tell you to use resistor wires, plugs do not matter.

The electrical interference that can be harmful to the EI module comes off the spark plug wires not the plugs.

 

[Tim PloughNman Daley RIP]

The electrical interference that can be harmful to the EI module comes off the spark plug wires not the plugs.

ditto red