restored 245

C Elliott

Member
Just wanted to show a few pics of my 245. Some before and after restoration.It took a couple of years on nights and weekends but I feel I have a new 245. Every piece was dissassembled, inspected and replaced or repaired as needed. All hardware is new. I added the aux. hydraulics and mounted a front pump which is totally hidden behind the front grille screen. Just wanted to share as I enjoy pictures from everyone else.

Curt
a53096.jpg

a53097.jpg

a53098.jpg

a53099.jpg

a53100.jpg

a53101.jpg

a53102.jpg

a53103.jpg

a53104.jpg

a53105.jpg

a53106.jpg

a53107.jpg

a53108.jpg

a53109.jpg

a53110.jpg

a53111.jpg

a53112.jpg

a53113.jpg
 
That there is real eye-candy !
Doubt my 245 will ever look that pristine, but those pics will surely encourage me to try.
Hat's off to you for a top-notch restoration.
 
Nice end result. She looks like it was rode hard and put away wet a few times.Pretty tough life it had. Good for another 50 years!!
 
Would not think it was the same tractor. You've gone all out on the hydraulics, it looks like a first class set up. What job did you have in mind for all the hydraulics? Wood splitter?
 
Great job!!!!

It's almost to pretty to go plow.

do not know what you plan to use it for, but i would have to have a front grill bumper.

Knowing me, first day out I would run it into something and scuff the paint.

again, great job,

you must have had some past painting experience.
 
Yes, I run a wood splitter. I am also buying a scraper blade w/ hydraulic angle and tilt. In case any one wants to know the aux. hydraulic system will flow 12 gpm at 2000 engine rpm and I have the pressure relief set at 2500 psi. Any body have any questions about this system and the parts, I will be more than happy to tell you what I did. This system works well.

Curt
 
BobUT: If you'll pardon the self-serving commercial, I've got a factory 245 manual I'd love to get rid of cheap
 
Well, lessee...it's loose-leaf, in larger std 3-ring lib'y binder; "Form No. 1448 778 M1" on the index page, no date I can find except lib'y date stamp 4-3-78. Ten sections, numbered individually, some with "CS"-number supplements/additions/whatever; I get 450 pages.
Most of the "CS" sections have "1st issue, altho one has "2nd issue", but no dates.
$10 plus mailing; can send pix. Will mail if wanted, when received if acceptable send me check for total, or simply mail back if not what you need/want/like. Questions?? pls email.
Many thxx for inquiry! Bud
 
great job.It takes a lot of hours to bring them back to that condition.Its a better job than factory because they would have painted over new hoses.well done!Is that a new steering cap?that particular one is hard to come by.
 
David,
Thanks for the compliment. Yes that is a new center cap. I looked long and hard for it. Also the 200 series seat decal is hard to find as well. The front grille tripple triangle emblem had very good chrome and I repainted the painted areas.

Curt
 
I know this is a really old post however I am interested in the setup you used for your hydraulic system. I was wanting to do a set up like this on my Massey 165.
 
I know this is an old post, and I have tried to search the forums with no luck, but do you have any detailed posts or a website or something of how you went about restoring your 245?

Thanks!

Matt
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top